(UNIVERSAL MACHINE). Replacement of manual mechanical tools is of great importance not only in manufacturing, but in the home work of the designer-lover, embodies with wood and metal in their designs. Sometimes even the most simple fixture, primitive stanochki significantly speed up the work, facilitate it and to dramatically improve the quality of the product. That is why in recent years an increasing number of miniature machine tools for processing wood and metal, designed for hobbyists and tinkerers.
AND IT WILL GO FASTER
This is a small children’s table with a sloping cover. Leaning back, the cover opens sufficiently spacious inner box; it can be divided by partitions into several compartments smaller. The basic material for the desks — planed pine boards with 20 mm thick Top cover size 650X550 mm glued from several boards connected just butt in pile or with two or three spikes. In all three options until the glue necessary to hold it in a compressed state, and monitor the screed: it should not cause any warpage of the set; the boards when assembling for the same purpose, should put the year layers in different directions.
The tinkerers are often faced with the need to forge some tools or household items. A temporary forge is easy to make from scrap vehicles. Enough six refractory bricks, blowtorch and improvised grates, made of steel strips with a thickness of 3-4 mm. In a fire-proof place folded, as shown in figure 1, the horn of bricks. On the bottom put two trimming water pipes, and on these bars, so that between it and the bottom bricks there is a gap. The grate is transverse slats of the grille is a little bent, so they seized the flame of a blowtorch and sent up.
Well, when the country house has a terrace, garden furniture. There is also not a problem: they will replace the retractable awning (Fig. 1). It will protect from sun and rain. Determine the size of the awning close to the house, mark the plot. If desired, it can be surrounded with decorative grilles, which swirls with greens. This enclosure is organized and the interior space of the plot. Several options for the location of the grids shown in the figures.
“Slavutich-M1” is a hybrid of conventional hang glider and the trike. Constructive simplicity, light weight, collapsibility, balance management principle and availability of the engine significantly expand the scope of this ultralight aircraft.
MATERIAL: heavy-gauge wire or metal rod with a diameter of 6 mm, copper thin wire, copper or brass sheet thickness of 3 mm.
