When grinding surfaces usually use bars wrapped around or nailed sandpaper. It is impractical, often have to throw away the pieces with a wide, completely untouched edges. We offer sanding pad consists of two parts: head with studs-studs and template with the response holes. Spikes — regular nails Ø 5-6 mm.
Now even at primary school pupils the abundance of tutorials and various secondary sources. So the books were always at hand and at the same time did not create the mess table, make this simple shelf-stand, resembling a lying letter L. For making it suit any slats, strips, fragments of hockey sticks, old furniture Naini and other improvised material.
I offer a sketch of the room sports equipment for children 5-8 years: “double” the horizontal bar or uneven parallel bars. The main advantage of the simulator is that it can be dismantled in a minute and clean under the bed.
This comfortable chair can make even a novice handyman. Tools required hand saw, hacksaw, planer, chisel hammer, Yes; materials — the cross-bar 65X35 mm and 35X35 mm, round rods (e.g., shovel handles), furniture upholstery or decorative fabric and foam for cushions.
At the last Moscow on competitions of athletes-boys, the attention of the participants and the judges drew a graceful microtiter Victor Moskovkina for long races in the class FSR-3.5 mm. First impression — the model is made high level in the form of a matrix, which is used to veclachi of the buildings of our leading masters. But then one of the comrades of the young designer super model cried through all the area of training: “Victor, get your box soon! In a few minutes your ready!”
This miniature machine probably would have liked the fabulous character of the story Leskov. With him making nails for flea horseshoes would not like the faster! However, it was a joke, but seriously, the lathe of microstock by V. Shpakovsky will be indispensable for the copyists in all cases where it is necessary to recreate the chiseled details.
For 10 years I read the magazine “modelist-Konstruktor”, and from year to year it is more and more like me. However, all this time was your “dependent”: only used published drawings for home-made articles. And here decided to talk about one design, an idea that arose when reading the article from the “Club home of the masters” — a two-story version of the children’s area.
Widespread in everyday life got electric pumps “Kama”, “Trickle” and others. They are quite efficient, reliable and unpretentious in operation, but are used as stationary units only where there is a nearby mains. However, if you replace the electric light internal combustion engine, the capability of the pump will significantly increase. Through the acquisition of autonomy it can be used to water a distant garden, to pump water from the flooded to the flooding of cellars, to wash the car.
All have long been accustomed to the fact that kordovye the car with a propeller is the most simple among the racing: case-stick, four knife-like wheels yeah the pylon model airplane engine. As it should be. This class is designed for beginners, his task is to instill in children the skills of working with tools and different materials, to give the opportunity in the first year of classes to partake of the excitement of wrestling competitions.
In recent years, modelers have increasingly used in their designs packing foam. This material is lightweight, sufficiently durable, uniform and well handled by termoindurente — Izanami of glow current to the nichrome wire. With proper use this is a very common material (usually together with veneer) model based on it turns out no worse and sometimes better balsa.