When the need arises to duplicate any negative or slide, the question is how to do it. Contact method seems to be the easiest, but not always acceptable due to the complexity of determining the correct exposure in the exposure. For those who have a video camera to macro mode with pull-out fur (NRF or similar), the task is much simplified because it can be adapted for these purposes. Will need only an additional frame from the slide projectors of the type “Light” or “Etude” and a simple holder for mounting them on the console.
Bort, the deck, the nest, Sapeda, turning” kalinya (risers) and horizontal (beds) framework hives.. Homemade design in this far from complete list of bee homes—are not uncommon. Sure: the new beehive, the author of which is repeated winner of all-Russian exhibitions of the best works of beekeepers, and (encouraging) a longtime friend of our magazine, will be greeted with interest by all interested readers.
When plowing or tillage in the garden is easier to use a walk-behind tractor with mounted equipment. This is due to the fact that lands in the garden, usually small; in addition, not all beds need to plow. In such circumstances, traktorist difficult to maneuver and how easy is unfolding almost on the spot. E. Kulikov (der. Bornukovo, Nizhny Novgorod region) when doing the tillers, on the basis of these considerations.
To carry different loads offer a lightweight collapsible cart, for the manufacture of which would require a small number of parts. This homemade contraption of frames and the rear wheels of two old road bikes. Cross beam, removable handle and cross braces made of pipes from the backs of old metal beds. Support removable hinges with spring terminal clamps — “steel rod” with a diameter of 6 mm. their Number is from four to six the Rest of the details — from the remnants of the same Velor
Car trailer, about which speech will go, was produced by D. Baker. In General, still quite a young man — he is 25 years old. In their family, loving actively to spend the summer vacation there is an old car VAZ-2101 and the boat “Kazanka” with the motor. However, to deliver the boat to the water was not on anything. So I conceived the father and son Pekareva to build a versatile trailer to the car so he could drive the boat and some cargo in the back easily removable. Unfortunately, Dmitry’s father soon died tragically. Nevertheless, the son continued the business and successfully completed.
I have developed an activator of water consists of two glued together half-liter plastic bottles of kvass (their wall at the junction with a window size 170×5 mm, sometimes there are small semi-permeable membrane) of two immersed electrodes, the rectifier and manicavasagar device. The latter is a 3200-turn coil, a wound wire ПЭВ2-0.15 per plastic sleeve with a length of 60 mm and an external diameter of 6 mm. 