Rotted benches in the dressing room… they were Made according to the ancient traditions of larch boards, comfortable, firmly put together and seemingly eternal. But the legs on the bottom and top and seat stitching has rotted. Besides, it turned out that their was a massive screen for the heat from the stove. In the end, the paneling behind the stands, do not dry, plesnila and spoil it. To address these shortcomings, I decided to make a new shop with metal legs and durable, and will not rot. The design will be “transparent” to heat flow from the stove to the walls behind the stands. Still, the metal has a property easy to heat up, accumulating heat, which will allow you to quickly dry the intersection of the legs with the seats and floors.
“COINAGE” ON THE SEEDLING
Today literally stumble over used in metal tins of drinks. I was thinking of what to adapt them, painfully good material fine silver, not stainless. Finally I came up with: I cut the bottles with scissors on a small rectangular plate, which is then giving labels for seedlings. The inscription put dried-up ballpoint pen: Read more…
Reading the tips in the magazine, I decided to share my way of deepening pipes for water column-the pump and install the bars of the fence on a country or garden site. With the help of a simple device consisting of two coupling halves and drummer, playing the role of the pile of “baby”, it is possible to bury the pipe with a diameter of 50 mm to a depth of 8 m. All work will be easily fulfilled by one person.
In the “M-K” No. 3, last year, as the announcement was published a small article about this tractor. As reported, the tractor I put together in 2010, and although already hard at work on it, but continue to Refine their machine, so in the description and photos that might not be the same. Immediately make a reservation: some components and parts manufactured or customized “on the spot”, and the drawings were made later to clarify the design. Therefore, some dimensions precisely to remove was not possible, they are approximate.
At the Russian championship 1997, she brought a gold medal to its author, the Moscow athlete M. Stepanov. According to many experts, this model is the Acme of perfection of the sports projectile of this class. Its mass (without a parachute and MRD) in just 3.5 g model in the widely known techniques of moulding of the fiberglass. The thickness of the applied fiberglass 0.25 mm. case and a fairing carefully crafted wall of uniform thickness. Tail part of the body in length 100 mm smoothly into the cone, and then into the cylinder with a length of 35 mm and an inner diameter slightly larger than 10 mm. In the same place, reinforced wire latch locking motor from inadvertently shooting when triggered, expelling charge.
At first glance, what could be simpler than a training glider? A small lengthening of the wing profile is thick, the straps are short. The small set of characteristics, it would seem, is obliged to ensure that the novice pilot is quiet and comfortable flight. That may be so, but, unfortunately, the beginner quickly get tired of just plan, he wants higher and higher. And a struggle begins between the flight characteristics of the machine and the safety of the flight.
Offers another use of the Jack for household needs. More specifically, to processing of berries and fruit juice. And the Jack is used here as the fundamental principle of the press. Still need a welded structure of steel channel (or contracted heavy-duty steel brackets and studs log frame), which is put vertically and secured as shown in the figure.
As you know, model airplanes and much hard work the most boring work is making ribs. Most often they are cut from plywood or veneer with a fret-saw or sharp knife, and then push the workpiece through the skins. Meanwhile, this is not too interesting and hard work it is possible to rationalize. Just need to make some simple devices that will dramatically reduce time costs.
In the late 80-ies of the family of light vehicles with a mechanical drive (from motorcycles and snowmobiles to ALS) enriched by a new species ultralight aircraft, received the official (according to the classification of the FAI) the name of the paraglider. However, in colloquial speech it is often called a paramotor (PM), implying underneath the whole apparatus. The word itself was born out of the brand one of the European firms.