MODEL CONSTRUCTION

TABLE PLANER

30.05.201813.05.2018Our workshop

In a makeshift planer front Desk with adjustable height work surface allows to provide the desired chip thickness. And this is the quality and processing performance. In this design of machine front table is raised or lowered in an inclined guide for moving by means of the lead screw.

A BAG OF FLOUR FOR A FEW MINUTES

30.05.201813.05.2018Small-scale mechanization

echnology the manufacture of major components of the mill are quite simple. From thick-walled pipe 60×10 mm should be cut on the machine supporting sleeve and “grab” it to gas or electric to advance cut a circle out of smooth steel sheet with a thickness of about 10 mm. Then, while holding the “oven MITT” in the Chuck of the lathe, the handle to the required size billet cap so that the socket diameter 332 mm coincided with the sizes of available drum. Likewise be made and a second drive.

“FLEET” UNDER THE BED

30.05.201813.05.2018Good recommendations

After playing for a day and the Statute, the child reluctantly removes the toys. However, if you make them a special podkrovelnye boxes on wheels with imitation micro cars, even picking up toys will be a continuation of the game — it will look like the filling body weight followed by “transportation” it under the Read more…

SIMULATOR SOUNDS

30.05.201813.05.2018Tips readers

“Development, published in the journal “modelist-Konstruktor”, make ourselves photoelectron shooting. Works flawlessly. It is a pity that the sounds in the scheme is not provided. Help!”. The fraction of machine-gun fire, screeching min, heavy bass bombs… Simulates a similar sound picture of the fight is pretty simple device, made only three transistors.

SHOE COMBINE

30.05.201813.05.2018Good recommendations

Four boards and four brushes is all that is required in order to in the hall of the rural house or cottage has a very convenient fixture for shoes. Thanks to him, easy to remove even tight boots or a few movements to clean dusty shoes. Big Board with a cutout main under it — Read more…

BANK-ACTIVATOR

30.05.201813.05.2018Small-scale mechanization

Getting a series of experiments related to the breeding of cold-resistant varieties of corn, I remembered about the amazing properties of water, treated with a constant electric current. In particular, that formed in the zone of the cathode, the catholyte has reducing (alkaline) properties and behaves according to the truth as “living” water, in contrast to its antipode — anolyte, a kind of oxidizer, or “dead” water produced in the area of the anode.Relying on high biological activity of the catholyte, decided to treat a handful of seeds before sowing in progressiya the ground. “Living” water was required very little. But where is the “spring”, from which it can be obtained?

TRICYCLE WITH ROLL

30.05.201813.05.2018Design

The history of car industry it is known that the first car was three-wheeled crew K. Benz. In the future, with increasing speed, was replaced by four-wheeled machine, the more stable in the turns. However, the designers did not leave the desire to create a three-wheeled chassis of the same resistance. It is constructively easier and lighter with the same capacity, therefore more reliable and cheap to operate.

COZY SLEEPING AREA

30.05.201813.05.2018Country house

When the master bedroom is spacious, it is possible to set the bed at the most convenient diagram — head end to the wall. This is especially important for two places: approaches to the bed from both sides, and each side can be put on the bedside table with a lamp, rationally arrange bedside drawer for bedding.

ROULETTE WITH A SPOUT

30.05.201813.05.2018Good recommendations

Conventional roulette is inconvenient to measure in the crevices, folds, blind grooves. I have attached the model to the usual roulette kind of spout — G-shaped bracket of sheet metal; its length is 50 mm. Now in a remote place enter the nose and make the measurement, adding to the readings on the tapes marked Read more…

AIRBRUSH OUT OF THE BOTTLE

30.05.201813.05.2018Own hands

Sorry, when intensive work on the preparation of the model or sample furniture negated by poor-quality color. Look at this product — plain, brush marks, air bubbles, clots…

Once my friend gave me a homemade spray gun, commonly called a spray gun. It was rough (even the choke was off), splashed and often clogged. But I liked inherent in its design idea: he worked from ordinary automobile pump.