The back of the chair can be flat, but bent much easier. How to do this? This does not require special equipment and technology is simple. Enough to have a furniture clamp and several supporting wooden beams. The middle of the plywood workpiece backless steamed over the spout of a boiling kettle. Placed it on Read more…
In order to pokleit Wallpaper or paint anything now likely to use a roller than with a brush. However, if the brush you can just dip into paint, then for the cushion already need a bath and RAS Katona Board for uniform impregnation with glue or paint. I made a kind of a drip. which Read more…
In homes today, it is used quite a lot of galvanic power sources (batteries). Even the most “long-playing”-of them at the end of life just thrown away, though their metal body remains as entire as at first. If you take it apart, it would make a great ring to strengthen the wooden handles of files, Read more…
In refrigerators with mechanical regulator temperature measured on the evaporator. It happens that the evaporator becomes covered with frost, and the thermostat begins to operate with an error, making failures in work of all lagoapraia. To combat this unwanted phenomenon (including — with the advent of frost) refrigerator has to periodically disable. In some designs there is a semi-automatic defrost mode, which the system is embedded a heating element with the corresponding button.
Of plastic five-liter bottles from under mineral water can do many useful things. One of these projects — country washstand. To turn it the bottle, you need to cut in her bottom three holes: what more — for filling of water and two small, under a rope loop for hanging the dispenser on a suitable Read more…
In the kitchen under the sink plastic drain from the knee all the time leaking water. Not only that I did: the gaskets were replaced, and wrapped the connections with electrical tape and rubber harness is useless. And helped me out of the ordinary ski wax. Filled it to the thread, and even after the Read more…
Is it possible? It would seem that it is hard to imagine this sleek high-speed motorcycle as a truck. However, it perfectly copes with the role of the heavies, thanks to the reliable and durable engine with good fins, as well as ample torque throughout the range of rotation of the crankshaft. I must say that this is my “Java-350/634” sidecar “Velorex-562” operated for ten years. Mileage was about 60 000 km With a full load the bike confidently overcame long distances and on motorways and on dirt roads. The roads and highly rugged terrain was not an obstacle for him. Trouble-free service of the motorcycle in these conditions is a sufficient proof that under normal conditions, in addition to three riders, it is capable of transporting significant cargo. But where to place it? The load capacity of the carriages is limited by the magnitude of 105 kg, to install additional trunk it did not make sense. The logical conclusion is to make a cargo trailer.
