
SWIM ON COT…
It is known that fish from a boat is better than from the shore — usually this fishing is much more successful. But the boat, at least the rubber there is not every adult lover of fishing. And where to get such a watercraft, for example, a young angler? Even the larger chamber of the wheel of the truck he to find easy. So inadvertently to pierce fish hook wonder. Meanwhile, the decision of the question to ensure yourself is reliable and cheap (if not free) craft lies under your feet. Using items that are discarded because they cannot be repaired or no longer needed, you can quickly build a good raft.
FROM PIGGY CRAFTSMEN
The lumber before use is recommended long to dry. In the traditional laying on the ground, it is difficult to protect them from moisture, and in the premises because of their size, they interfere.
DIMENSIONLESS REGIMENT

NOT IN HIS ARMS AND TRAY
Typically, the wood for the stove or fireplace are the arms, which is not always convenient and pleasant. Manufacture on the case of a special tray. Take a sheet of roofing iron, preferably galvanized, of a thickness of 0.5 mm. slightly longer in length your wood, and a width of 300-400 mm. Fold back the Read more…
THE PLANE AND GLIDER

“PIPER”: A CONTOUR COPY
Competitions of different rank showed that as prototypes for the manufacture of contour models are used only a dozen types of aircraft. And to participate our aeromodelling circle in the next competition, it was decided to make a model rare prototype. Our choice fell on PIPER CAB, one of the most successful light aircraft, produced in mass quantities since the pre-war (1935).
ADHESIVES FOR PLASTICS

SCREW FROM THE NAIL
If it took a long screw thread M2—M6, and they are not (by the way, is not easy to find and sold out), it is easy to produce such a nail of suitable diameter, cut into the rod thread and propilov in the hat slot. I. GLUKHOV, Saransk, Mordovia
BUILDING A CHOPPER











