Parameters and characteristics of the model correspond to the categories Ѕ8А and Ѕ8В. The diameter of the container under the engine selected in accordance with a cross-section of the sleeve (MRD-2,5-3-3 or MRD-5-3-3). We present several design and technological recommendations for the production model.CORD PROTECTION
Cord electric soldering iron is typically not heat-resistant insulation. Therefore at its hit on a hot tip, perhaps a quick melt insulation and short circuit of wires. To avoid this, it is necessary to wear a cord round the required number of ceramic insulators that are used in the irons and frying cabinets. Plug contemporary Read more…
The tinkerers are often faced with the need to forge some tools or household items. A temporary forge is easy to make from scrap vehicles. Enough six refractory bricks, blowtorch and improvised grates, made of steel strips with a thickness of 3-4 mm. In a fire-proof place folded, as shown in figure 1, the horn of bricks. On the bottom put two trimming water pipes, and on these bars, so that between it and the bottom bricks there is a gap. The grate is transverse slats of the grille is a little bent, so they seized the flame of a blowtorch and sent up.
