When we sometimes hear the term “Automodelisme”, most often remember the boys with the excitement of chasing RC cars. Indeed, in recent times RC automodel sport has become probably the most popular model hobby. But it was not always so. First was speed, cord automodelisme, which appeared when the radio was out of the question.SELF-SIMILAR SPORTS — WHAT IS IT?
When we sometimes hear the term “Automodelisme”, most often remember the boys with the excitement of chasing RC cars. Indeed, in recent times RC automodel sport has become probably the most popular model hobby. But it was not always so. First was speed, cord automodelisme, which appeared when the radio was out of the question.
This is a float option ultralight aircraft “Chick-2”, which is designed and built in the club ALS “Rotor” (Kumertau, Bashkortostan) under the leadership of V. Gribkova, pilot and designer, is widely known to fans of light aviation. Wheeled version of the aircraft has a length of 5.45 m, height 2.3 m, wingspan and wing area, respectively 10.2 m 12.7 m2.
We offer an interesting model of Leningrad designers B. Abramova and V. Alexeeva — a rocket complex with — cancer heated — designed for the Modeler, already built such devices and are familiar with the theory and practice of their launch.
Dream… How can she be the child? 1949. I am 5 years. Father Andrewski, the boy next door, buy somewhere a used pedal car (our industry at that time, in my opinion, not released), restores him, and the envy of all the boys of our yard this Andrei proudly unrolls it. Now it is very difficult to convey in words gripped me then feeling. It wasn’t even jealousy, something more, it was a solar Eclipse, it was my childhood dream.
Good modelers know how important it is to provide reliable stop screw rezinomotornaya model in the transition planning. Offer readers the design of the front boss with the stopper (Fig. 1, 2), securing the stop screw in a certain position.
This model can easily produce young technician familiar with the basics of automodelisme and able to work on machine tools. The construction should start with the manufacture of the pan, which is cast alluminium alloy or milled from a single piece of identical aluminum alloy. All marking and drilling the screw mounts and bearings rear axle is best to do when these details are ready. The tires are made of raw rubber by hot vulcanization and with a disk. In of front wheels chiseled the holes for the ball bearings 4Х16Х4, and the disks are pairwise connected by three M3 screws.
Lives in the people the joke about the old woman who, driving in the evening your chickens, consider them a kind of binary system
To the editor of the magazine received a lot of letters in which modelers are asked to familiarize them with the device of the engine, designed by the Leningrad athlete E. Gusev. During 1970-1972 racing the car with this engine (cylinder volume up to 10 cm3) set five all-Union records.
If your car begins to deteriorate the acceleration performance, then the conclusion – it’s time to clean the injectors. But many motorists still prefer to do their vehicle themselves. Many even invent their own mechanisms to obtain good results.
The desire to populationat something unusual led to the creation of a very effective model of a glider of the type “flying wing”. The desire to “be different”, probably typical for any Modeler. Often this feeling leads to quite extraordinary decisions that could affect the development of a whole class of models.