Offer paired schematic model made in model aircraft laboratories of the station of young technicians in the city of Nikopol. Structurally, it is a “aviamarch”, consisting of carrier-glider attached to the carrier special locks rezinomotornaya model airplane.START IN FLIGHT
Offer paired schematic model made in model aircraft laboratories of the station of young technicians in the city of Nikopol. Structurally, it is a “aviamarch”, consisting of carrier-glider attached to the carrier special locks rezinomotornaya model airplane.
In the early 70-ies before the Soviet athletes-automodellista was a challenge: dvuhsotmetrovy to exceed the threshold speed in the class of models 2.5 cm3. These days, the speed has mastered many of the leading athletes. A sharp jump occurred in 1973, when during the season a few models exceeded the speed of 220 km/h.
The triumph of the Soviet athlete V. Extencive in the class of models of gliders ended the world championship in 1973. Short nose and a relatively small shoulder are the main design features of the model of a champion. The layout is very different from the standard, which is used by most of our leading modelers.
How to ensure reliable and trouble-free fit of a model rocket? The solution to this technical problems struggling for many modelers. According to statistics, more than half of the models after the descent have breakage. But time goes on, experience is gained, more diverse ways of salvation models.
You can put on the car 4, 8… even 16 wheels. However, in the tundra, for example, even this machine will not work and kilometers. And no wonder that whole design teams engaged in the search for new propulsion, which would come to replace the wheel and provided all-weather cargo delivery, hauling of the forest, the work of the search parties… Already established for this purpose samples of tracked vehicles with very broad, almost 1.5 m tracks, snegokatov, hovercrafts.
As described below, the thresher works on the principle of rolling corn cobs in the progressively narrowing gap formed between the cylindrical drum and concave with rubber surfaces. Cob, salinitas between the drum and the cover, rotates around its axis, while it is separated from the grain.
So it is from time immemorial: the harvest of potatoes and before putting it in winter storage, and shortly before spring planting is sort — separated small tubers, which are fed to cattle or processed for starch.
This velocity model of his own design, is designed to perform a figure of course. The model can be made in the traditional method where the frames are assembled with plywood with thickness of 1 mm, a keel from a piece of wood a cross section of 6X10 mm, the stem is made of plywood of 3 mm thickness, stringers — strips of a cross section of 4×4 mm. the Hull is sheathed with millimeter plywood; experienced modelers make it from fiberglass, pre-prepared matrix. To strengthen the hull glued the keel bar, and extra stringers and a bulkhead separating the engine compartment from the compartment with the radio.
This tractor for almost 20 years, and all these years he not only regularly serves his Creator A. A. Safenano from the village of Alexandrov, the Tambov region, but also constantly improving. A feature of the car is a bucket-loader which is quite rare among self-made designs. This device is good because it optionally can be used as a blade, for example, when clearing snow from roads.
Want to offer readers to build an electric scooter. However, this is only an idea, without detailed development. This electrosolar can be made at home, using the components of industrial scooters. Bearing parts can be made of pipe of suitable diameter.