Advice

Paper tape glued to the joint between the door frame and the wall, protects the knot from cracking and shedding of plaster. Better to glue or PVA Bustilat.     D. ZVEGINTSEV

Tanks for water, as almost all gardeners are very uncomfortable to carry. But if this capacity is the side of the handle, a good helper will be a trolley made of planks and any wheels from children’s bikes or strollers. Tank is suspended on a hook over one of the handles. In this position it Read more…

If you need a clamp of a certain size, it can be made from what is at hand: steel rod, strip, angle or profile. Making them need the bracket, drill holes in it and threaded (or welded nut) under the clamping bolt and the tool is ready.

In improvised furniture experience the greatest difficulties when sealing the ends, especially chipboard. I hang the ends of the veneer. On cut to size a strip of veneer put in a thin layer of PVA glue and giving it a little dry, apply a strip of detail. Then slowly iron the veneer with a hot Read more…

It is easy and convenient to clean the floor in the Studio or room with any ordinary MOP, the “dressed” Terry cloth Velcro.

Everyone had to solder, know how much trouble is due to the fact to hold the workpiece in position. Much easier to work with if you make a simple vise, consisting of several pegs mounted on a wooden bar.

In the manufacture of hull racks for back walls typically use fibreboard sheets (MDF, or, as they are frequently called, – hardboard). For transportation of wide sheets are cut, providing the kit for subsequent docking of the special H-shaped plastic profiles. But the edges of the sheets of them during installation constantly popping up. Pomaia Read more…

If you have stopped shrinking tape-fasteners-zippers on a garment or a bag, don’t hurry to the shop to change it – but this work is more expensive of a product. Apparently, all problems – in the castle: erased or dispersed back part of his upper and lower cheeks or side walls. Try narrow pliers (or Read more…