Advice

The device shown in the illustration will be useful to all house masters, making furniture with his own hands. With its help you can easily and quickly roll while gluing forever lagging edge of the decorative film or thin plastic.

A kind of umbrella made of sharpened timber th a plywood “roof”, will help protect the tomato seedlings from hot sun or a sudden hail.

In fact, the “floors” can be very different, as well as the selection of plates and saucers, depending on the purpose: fruit, berries, candies. It is important that all suitable options proposed the principle of multilayer Assembly. The base vase is a long bolt M4 flat-hat; however, an other solution, say, using the wheel spokes. Read more…

Pockets home worker during work, usually “clogged” with all sorts of “needed stuff”. To increase their volume and provide easy access to help special apron with pockets made from old jeans.

When fails the “proprietary” socket or the plug, replace it first got under a hand not worth it. It is possible to make an exact copy of this electroelements, virtually indistinguishable from the original. First, we need to make a matrix into a cell from sheet metal to kalit to half epoxy resin and plunge Read more…

A nail and a screwdriver located as shown, will help you out, if in the bustle of work had disappeared the key from the Chuck of the drill and the drill bit must be urgently replaced.

If, during the filling of high capacity water (e.g. drums) intended for watering the garden, throwing a rubber ball of small size, its appearance over the edge of prompts to close the valve. Thereby eliminating the need for constant monitoring of the level of a cursory glance.   N. SVIRIDENKO, p. Pervomayskiy, Kazakhstan

In many cases, it is convenient to mount the TV on the swivel stand. This device is easy to do on the basis of gymnastics “plate” — sports a rotating disk simulator. To turn it into a stand under the TV, “plate” it is necessary to disassemble the top half to drill three holes through Read more…

For those who often have to go up and down with the bike on the stairs, might want a special handle for carrying. It is made of metal tube 18…25 mm and is fixed by welding or clamps to the fork frame 30…50 mm above the drive sprocket.   Yu PUDOVKIN, p. Maikop, Krasnodar region

When a bike will travel thousands of kilometers and the spokes on the wheels spabot, tighten them — not an easy task: rust and dirt do the job just unbearable. Offer a simple way to without any problems to adjust the tension of the spokes. This will require a transformer (250 watts, 220/12), the wire Read more…