Advice

Many of you probably had no fear of climbing into the attic on this outside in rainy weather. One careless movement – and, as they say, “will fall and the bones will not collect”. However, the ladder is very easy to “tame” beat to every step rubber Mat, which you can buy in the store. Read more…

This advice is specifically for those who know the situation when they are faced with aakriti the door forgetting the key at home. To avoid this, stick around the keyhole or lock glue type “Moment” one of the pieces of Velcro attachments, the other will secure the keys (for example Nachev it on leather FOB). Read more…

In one of the rooms of the magazine was published a material “the Jigsaw for Plexiglas”. Offer instead of nichrome wire to make a “electropulse” of two strands of nichrome. In this case, the windings will act as the teeth and the work will go faster.   K. FILIPOV, Moscow

Not always rack shelves require a stationary position. Temporarily any of them can be attached using derevyannyh wedges placed in the gap between the flange and the wall of the Cabinet.

If you pin, as shown in the illustration, a conventional hammer with a thin layer of polyurethane or of thick rawhide, it becomes possible to use it during the Assembly of panel furniture, metal works – in short, where the damage to the surface is extremely undesirable.

Typically in any room can be hung not more than one ceiling lamp. And architects and builders for some reason believe that the ceiling is appropriate only one chandelier, and for local lighting is better fit wall lights. Although ceiling lamps, unlike the more convenient. However, installing them is not simple — you need to Read more…

To make cutting tile easy method “cleavage”, using a common wrench size for the nut which is 1…3 mm greater than the thickness of the tile. To speed the lower edge portion of the key need to sharpen. E. FEDOROV, Zaporozhye

If Phillips lost the mailbox key, do not worry: replacement can be done yourself. This does not require a milling machine, you only need a strip of metal flat needle files and of course savvy. The manufacturing technology of the key is quite simple. First handle part of a key 1 and 2 (see figure), Read more…