However, not only for her. This ring is a good gift for anyone who knits on the needles, especially in two threads. Usually they are passed through the index finger, slide off him and are confused with each other. And thanks to this ringlet, made of a suitable copper or aluminum wire (with small turns Read more…
Often, after the hole is drilled,further or a clean, slightly to expand or to make a slightly oval shape. This work can be facilitated steel Bender, automating it with a drill in a cartridge which is inserted a circular, semicircular or even triangular needle file or similar file section. V. SIZIKOV
Have a bad fitting or old doors, Windows, vents blows very often in the cracks where the hinges. In other places it would be possible to adapt all sorts of seals, but here? However, there is a solution for this case. And nanoline easiest and just as effective. Enough, it turns out, lay in the Read more…
Cool off on a hot day, to perk me up after working in the garden is possible, even if your part is not yet special shower installation. It will replace a rubber or plastic hose with holes, rolled into the ring and with tee podstugivaniya to the water. P. IVANOV, Stupino, Moscow region
What coil do not occur now in our everyday life and tape, and fishing, typewriter and film projector and all have one awkward feature: they are wound — tends to unwind. For all of them a simple and reliable latch will serve kolejno of underwear elastic: soft and wide, it does not give content to Read more…
Whether from the Christmas holidays, whether family celebrations are often ogrocki candles. They can be used as a kind of steam tables — devices for maintaining food in a heated condition. It’s enough to make a pot stand from the wide tin cans with holes on the sides and in the lid, and set inside Read more…
Now many boys are addicted to “rolling”: by all available means trying to build muscles, the “pump”. I think they might be interested in offer just a simulator, which can easily be fitted in any yard on their own. Any cross — bar, the bar on the knot of the two trees — on the Read more…
In the baths of the old sample, where the shower head is located high on a tubular rod, the water sprayed too wide, gets on the floor. “Curb” this water fan will help a kind of “lampshade” from strips of plastic sheet fixed with wire on the shower head, as shown in the figure.
If you like to wear hats then. probably should take care of the way they store, for the perfect shape. One such option is to make your headdress a special hanger for example such as shown in the figure. P. IVANOV, Stupino, Moscow region
To drill glass and be without a carbide tool — an ordinary HSS drill. First half of glass thickness drilled hole of 3 mm in diameter, and then reams it to a diameter of 6 mm. After that, the glass is flipped upside down, and the operation is repeated. Drilling is necessary on both sides, Read more…
