Advice

  Today literally stumble over used in metal tins of drinks. I was thinking of what to adapt them, painfully good material fine silver, not stainless. Finally I came up with: I cut the bottles with scissors on a small rectangular plate, which is then giving labels for seedlings. The inscription put dried-up ballpoint pen: Read more…

  I want to tell you about a rather unusual method, the obtained shaped glass without a glass cutter. Its role is performed by the wire twisting (that are attached to wooden poles buried in the ground concrete column-“stepson”). In the twisting choose a place where the gap between the overlap of wires equal to Read more…

This device (see figure) is used for drilling holes of small diameter, which is often required in the manufacture of small structures, models, repair of printed circuit boards. For the manufacture of tools need use metal rod ballpoint, pre-cleaned from the paste. The end of the rod with the ball removed. Drill which is attached Read more…

Indeed, the problem of storage in the apartment forever preventing bike will be able to decide if you pin at the top of the corridor wall a kind of hanger for him. Hanger consists of two hinged bracket hinged mounted on a common base. The brackets top holes under the frame of the bike.

Participants of military-Patriotic games from small to big deal for a clothing and “armed” with copies of famous machine guns PPSH, one form of which caused the enemy to panic: “Guerrillas”! Make a copy of such weapons is not easy, but the children of the war years dealt with this problem quite handily. Ordinary Board, Read more…

If you want home painting work to produce without too much hassle, quickly and efficiently, make herself a foam brush. Wooden handle, a pair of U-shaped dural lining, rubber ring-retainer Yes the strip of foam rubber – that’s the whole tool. This brush does not drip, does not leave stains, and the hairs do not Read more…

Such a tool would work if in wood handle metal brushes to punch the metal plate. The tool will be indispensable in the preparation of surfaces for repainting plate conveniently scrape loose layers of old paint and brush to clean up space for the new.

Below the window the window is not slammed shut from the wind or drafts, it is sufficient to attach the fuse turn. At the closed window position of the turntable is horizontal. In an open “beak” down.   V. GOLOVASHIN, Rybnoe, Ryazan region.

Simple and reliable, and if necessary, split the loop turns out of the three bent as shown, metal plates and nail as their axis. The purpose of such loops can be very different. For mounting each of the plates is sufficient to drill two holes for screws or bolts. V. AVTUKH, p Ozery, Belarus