In the journal “modelist-Konstruktor” No. 12-97 was given to the Council on the restoration of the zip with the weakening of the lock slider need to pull it out with pliers. However, the lock does not work sometimes for another reason — loose the socket in detachable “zip” and her teeth jammed at the start Read more…
It so happens that the painting hung on the wall for years, got bored, or they don’t. However, before to send her to the closet, she can still be of use, turned into the original tray For glazed the picture frame, it is sufficient to attach two wood handle. According to this principle it is Read more…
Cutting plywood or plastic — NV always bargain waste. See peat do you have idle remnants of any previous cutting? If there is trim in the form of a quarter circle and two triangles, it is almost ready corner shelf for indoor or balcony plants. The triangles, connected by slots to form the bracket, and Read more…
If you have accumulated empty empty threads, use them to make convenient holders of knives on the inside of a kitchen shelf or cupboard, it is Sufficient to attach two coils close and peculiar sheath ready.
There are special devices for sharpening dull or broken drill bits If they are not at hand then try under a rotating drill bit set suitable abrasive (e.g. abrasive wheel) at an angle of 30 or 45 degrees — and the drill will self-sharpening.
A portable lighting lamp on a long cord helps not only under the hood of the car, but in the cellar, in a dark back room. But here’s the problem: how to store? The perfect pencil case will cut plastic tubing with an inner diameter corresponding to the diameter of the bulb. As for the Read more…
Another good detail remaining after the use of metal cans with drinks are not bugging me is the ears which pull to open a Bank Finally found a use for them and sewed to the carpet for hanging on the wall Durable and comfortable lugs serve for many years.
Anyone who had to do the corner ASKO wooden sticks for various kinds of frames, knows what it is painstaking work that requires carpentry skills, patience, special tools and devices to Simplify matters let . an ordinary hacksaw and pieces of veneer Sawn at an angle of 45° the ends of the bars of the Read more…
The knob for tightening the Chuck of a drill hvastovichi a bit short, so you need enough pressure to firmly hold the drill, especially in the old, soft, cartridge. But you should wear on the shank is the metal extension tube and operate the upgraded knob will become much easier and more convenient. G. ANDREEV, Read more…
During painting operations, any pause — problem: where to put the brush? Help out a simple string, stretched between the ears buckets of paint. Neatly folded on it, the tool will quietly wait for when you will be able to continue the work.
