A wonderful sander is obtained from the drill, you only need to equip it with a set of abrasive tools. Some of them are easy to make yourself. In particular, to make a cylindrical abrasive, you will need a wooden drum of suitable size and steel stud M8, fixed it using p^ry nuts. Well, in Read more…
A long-standing desire to have a coffee table brought me to a furniture store where there was at least a strong desire to make this table their own — these were there prices. Turned up under the arm of the old chair — is not the basis for the table? Sawed off the back, top Read more…
Whether you’re building a garden house or fixing a car is easier, of course, to have the tools at hand to not run for each and not lose after use. The simplest multi-bag”bandolier”, hung at the waist, — comfortable instrumental. It is always with you while working, and at the end it is easy to Read more…
Have a gardener to care for plants, a lot of small additional tools, which need to have on hand while working in the garden. Here’s a simple box will not only serve as a convenient instrumentation for carrying and storing all kinds of rippers, scissors, shovels and rake. It is also a small chair, by Read more…
Always see during winter time old lady with difficulty dragged through the snow their shopping carts with products, and wheel trucks get stuck in the snow. I propose by analogy with the runners for baby carriages made of metal of area a small slider, and to them fastened a tin box that tightly would include Read more…
Device for spiralno lines are usually quite complex in design, can not be said about the method of its receipt. A circular boss fixed to prepared for the drawing surface; the wound on the boss thread, and the other end tied on pen or pencil — that’s all, “device”, which is clear from the figure.
Shield with instruments convenient, but takes a lot of space on the wall. To combine ease of use with economical home location of instrumentals that will allow such revolving design: the metal clip-bracket and rotating the box. If the latter is to do with doors, it is on the shelves, you can store bulk fixtures.
To work with kitchen cutting boards is not very convenient: its area is not always enough, and cut have to periodically remove it to free up space to continue working. Attach the Board to the four legs of this height, so you can slip the pot and the Board will turn into a continuous conveyor, Read more…
The back of the chair can be flat, but bent much easier. How to do this? This does not require special equipment and technology is simple. Enough to have a furniture clamp and several supporting wooden beams. The middle of the plywood workpiece backless steamed over the spout of a boiling kettle. Placed it on Read more…
In order to pokleit Wallpaper or paint anything now likely to use a roller than with a brush. However, if the brush you can just dip into paint, then for the cushion already need a bath and RAS Katona Board for uniform impregnation with glue or paint. I made a kind of a drip. which Read more…
