
NOT BUTTONS, AND SCOTCH
For fastening the sheet with a picture or drawing usually use a pushpin. However, they leave holes both on paper and on the basis, on which is a leaf. Better for the same purpose to use sticky tape, such as Scotch.
For fastening the sheet with a picture or drawing usually use a pushpin. However, they leave holes both on paper and on the basis, on which is a leaf. Better for the same purpose to use sticky tape, such as Scotch.
If a wooden bar and drill two holes the diameter of pencils or flomasterom — get a new handy tool for drawing or sketching: one motion will be two parallel lines. Instead of a single bar it is possible to use two longitudinal halves, in which to choose the grooves for writing the stems and Read more…
Not so easy to hold on the wall paint a straight line but still the same width — any brush here — unreliable assistant. Easily cope with this task will fail if the manufacture is shown in the figure is a simple device consisting of two rollers: foam, impregnated with paint, touching it rubber carrying Read more…
Usually barbecues and barbecue for barbecue or roasted meat, a heavy box-shaped device of heat-resistant metal, welded, riveted or cast housings, mounted on legs. The illustration shows a suspended version, which is easy to reproduce on their own: zhelobkova roaster from a metal sheet together with the grating suspended on chains to a U-shaped tubular Read more…
In older toilets hinged toilet cover with noise hits the pipe spillway, and the two contact surfaces in this place over time, injured. This can be avoided if reinforced pipe is a foam belt. N. KOZIAKOV, Voronezh
Every GameSpy master keeps his tools in different ways. Most often just keep them in an old suitcase or a crate of parcels in a closet or in the attic, folded haphazardly. Here is a simple device that will allow you to keep small tools: screwdrivers, wrenches, chisel. For its production only need clothespins and Read more…
Its really easy to bend the tin, and even better — from a thin sheet of colored metal, but of course not for sending by post. Make at the top, not a bent valve, the opening and hang the envelope on such stud and the wall next to the table, which prepare lessons. He Read more…
That usually takes home the wizard when you need to saw off the bar or the Board? Most often, kitchen stool, judging by the scars left on it by the saw. Meanwhile, it is easy to make from two small plywood or particle boards simple trestles. Two vertical fins are connected with hinges, and the Read more…
We all know that when watering garden plants water shall be sprayed. For these purposes it is possible to manufacture the nozzle on the hose from the segment of steel pipe of suitable diameter. First billet from one end should be flattened, and then a hacksaw to make here is a keyhole that will allow Read more…