

To harden a steel part in a domestic environment, it must first be heated, as, for example, on a gas burner. However, the question arises: what is its holding? Pliers or forceps are not very comfortable with this, as they themselves get really heated, delaying the process. Better to hang the item on a wire, Read more…
When the need arises to have a variety of door keys, the more of the same type, it is advisable to gather them in one clip strung heads on the bolt and not tightening too tight with the nut that you can rotate in working position need at this moment key.
On a sloping plastic clothes hangers too thin dresses with spaghetti straps and sundresses — strive to slip and fall. It is easy to prevent. It is sufficient to heat them “horns” over the flame of a gas burner (of course with caution), and then slightly bend them up and the shoulders will be reliable Read more…
to insert the keys in the front door on a dark landing, and requires some kind of illumination. Well, when a box of matches or a lighter. This problem will not arise, if the door closer to the lock pin miniature flashlight button: fortunately now there are many suitable options fobs illuminated.
If you have an old inflatable mattress, consisting of several independent sections, it is easy to adapt as life jacket for boating. You will have to sacrifice one of the middle sections, making it T-shaped hole for threading of the head. To fix the other slightly inflated section around the torso using the waist belt Read more…
To lift the car body, for example to change wheels, no problem, if there is at hand the Jack, though this procedure and you will need to spend some time. And in the conditions of garage or repair shop the same result will be reached almost instantly if manufacture of pipes and bearings such that Read more…
Carry a bottle of not very good, but if three of them at once, and you carry no bag, no? Make for such cases of plastic plates or plywood that such a compact handle with shaped holes in them are inserted, and held securely the necks of bottles, which allows you to transfer them without Read more…
Fans to cut a variety of openwork decoration of wood has its own fixtures — ranging from simple plates of the dovetail with a clamp to vibrolance with electric. I propose for this purpose to use an old sewing machine. In its needle holder instead of a needle you can pin the short cut saws. Read more…
If the drawer have a lot of pencils, markers and pens — do yourself here’s a handy table pencil. It will require a minute of free time, plastic, ceramic or glass jar and strips of thick paper (e.g., Whatman). Screw the paper tubes and fill them to the Bank: they are comfortable will keep any Read more…