It is known that the temperature of the soldering iron depends largely on the quality of the performed installation. Are particularly bad (if not harmful) to overheat. Immediately deteriorating the quality of the soldering, there is a risk of peeling the printed wire Board, is accelerated wear of the operating rod, and even failure of the heating element. Sting often cleaned of oxides and overheated — not holding solder.
WARNING LIGHT-IMPROMPTU
If your old moped or motorcycle there is a warning light that tells the driver about turning on lights, it is not necessary to open the harness wiring and to connect additional warning light. Much easier to fix the front headlight on a thin needle color faceted bead or button. When you turn on the Read more…
For feeding low-voltage soldering iron from a household outlet uses simple adapters, which are, as a rule, the quenching capacitance (capacitor for a specific value). However, the use of such a device for installation of equipment with microprocessors, field-effect transistors and other electronic components afraid of static electricity is undesirable. Too high risk of breakdown due to the direct connection of the heating element with electricity of high voltage. Need galvanic isolation. For example, in the form of a step-down transformer.
