Simple home technology allows to obtain a universal adhesive, which is applicable for the connection details from a variety of materials.
For its production is taken linoleum old varieties, crushed and filled with acetone for 10-12 hours. After dissolving, the glue is ready to use, and the density of it is adjustable by adding one of the components or by mixing powdered fillers (chalk, talc, sand).
On a country or a plot over time, accumulate debris that owners tend to burn in the fire, that is unsafe in the fire relation. Much better for these purposes to have a special stove, make that very easy.
In a conventional 200-liter barrel available method (welding, drill, chisel) have several ash-pit hole with a diameter of about 50 mm at the bottom and two pairs of the same inner side a little higher from the bottom.
“Surgery” on the site
Approaching the long-awaited season for lovers of skiing hikes of the day off.
Nice and easy will playfully glide on skis along well-trodden paths in the Park or the suburbs, bypassing the dangerous descents or too sharp turns. However, this option is not always available, especially in Hiking cross-country and even wooded areas. Often forced to overcome risky for ski areas may lead to their breakage.
When there are no currently existing specialized clamp “hangers” for trousers, help simple improvised, which nevertheless will be securely cope with their functions. Moreover, their production would not require much labor or time.
So will be able to do if you need to glue some detail to a vertical surface. There is a simple way really allows you to do in this case bezdolnogo temporary fasteners will be replaced by pressure: the load suspended as shown in the figure.
Sometimes in the old pipes rust gradually eats the metal, and formed a fistula-a small hole, which begins to beat a thin fountain of water. To eliminate it before a locksmith will be able and by if are shown on the drawing. On the hole covered with a bandage of soft rubber, which is pressed Read more…
Old alarm clocks and many doorbells and telephones emit a signal due to the blows of “hammer” metal hemisphere of the bell.
If you are annoying it’s pretty sharp rattling, stick a bell in place of hitting it square of adhesive tape or medical adhesive tape device will beep “whisper”.
When you have to prepare for painting surface with long layers previous updates, it is always difficult to remove them.
The work will be simplified if it is to make a special scraper made of wooden planks with arched fixed on her with the blade of a hacksaw on metal (with a pre-holiday fire): her toothy edge will cope with any layers.
This unusual method of forming holes in the glass not only allows you to do without a glass cutter, but provides the ability to shaped cut-outs and, thus, the details of sheet of different thicknesses.
After application to glass need lines take an ordinary soldering iron and touch the edge of the glass with a hot soldering tip is formed with a hairline fracture “lead” on any curve, but would not stop the touch of the soldering iron.
Those who are engaged in home hydroponics and growing seedlings or herbs on the windowsill, suggest of plastic bottles to make excellent vessels for growing greens.
