About the miracles did not suspect in a small garden cooperative near Bryansk. We gardeners in mind one thing: get the water from wells. In the heat of all able-bodied people are chained down to heavy handles cast iron pumps. Need to download bucket after bucket to water the thirsty seedlings.A PUMP CONNECTED TO THE SUN
About the miracles did not suspect in a small garden cooperative near Bryansk. We gardeners in mind one thing: get the water from wells. In the heat of all able-bodied people are chained down to heavy handles cast iron pumps. Need to download bucket after bucket to water the thirsty seedlings.
Somehow caught us a description of the six-wheeled Rover “Giger”. The main nodes it was very simple. Absent transmission, driveshaft, rear axle — these, in General, quite complex and heavy assemblies. Small engines — separately for the left and right sides through a V-belt CVT transmit torque with its series of wheels connected by a chain. The supports of the axes of pneumococcal rigidly attached to the body and turns was carried out by adding the engine speed on one side and reduce the speed of the other.
The car, which will be discussed, began to make acquaintance of mine in the late 1980s, when the automotive abundance was not far off, but we did not yet know. However, as soon as he made the frame with pendants, the enthusiasm waned; I had to continue the construction of the car to me. Having estimated the possibilities, I decided to take this job, especially because experiences in such a case I had earlier today I have restored practically from scrap “Moskvich-401”.
In the last issue, we reported on the unusual at first glance, the method of drying wood in the bath water, between the electrodes, the supplied current of industrial frequency. This technology shortens the production cycle and ensures high quality products. However, the method is designed primarily for handling hard wood.
The windsurfer, like any sailboat needs wind. Meanwhile his body-the float if necessary, you can swim in the calm. In the journal “modelist-Konstruktor” once mentioned about using the body in the rowing version, with two-bladed paddle or with a conventional pair of oars (though in the latter case, had to build a removable frame with a seat and two supports under the oarlocks).
Improving the efficiency of the drive — a problem which concerned not only the designers of the bikes, but the owners of these cars. Since the invention of the Bicycle pedal drive brought, you might say, to perfection. To improve its efficiency without complicating the mechanism is hardly possible.
NOT YET — HIS HANDS
Machine, about which speech will go, was created as a commercial vehicle, which helps to survive in our difficult time. The car gave me and my son for almost a year. I would like to thank the inspector Gostekhnadzor R. L. Markin. He is also an avid homebrew and a lot of things made with their own hands. And helped us in word and deed.
Built by A. Lomakin and tillers, and not absolutely usual — it with a crawler gear: a variant of its execution is best suited for soil in the garden or in the garden. For this purpose, the cultivator is pivotally odnoimennyi the plow. Depth or elevation of the plow is made by the arm movement up and down, the mount which in this case is attenuated and becomes articulated.
Now, as strengthening the material-technical base of agriculture, in all growth, the challenge to improve its efficiency, to improve all quality indicators. This requires… care about how to allocate state funds and material resources were given highest return to better utilization of internal reserves of the collective farms and state farms. And they, these reserves are.