A lot of trouble delivers the movement of the machine along the surface of the workbench during operation. This can get rid of the crafting for each stanochek stand with four spikes, and the bench, drilled the appropriate holes.
For convenient storage of magazines, clippings and other printed matter manufacture of a special cassette. Run them from any sheet material. For quick search edition paint the backs in different colors and attach brief information about the thematic content of each magazine. They filled the racks have a very aesthetic appearance, making the interior element Read more…
I propose to use a wrench as nidificantes in our time knob to operate the taps and plumbing expansions. This steel hexagon need to make an adapter with a square hole corresponding to the tool shank. Set adapter always save you from possible accidents when you need to thread or handle the pin hole. Yu. Read more…
If your summer cottage is still no Russian stove, to dry for winter mushrooms do not worry — the unit, a metal box with holes in the side walls, and a few wire rods, collected in shown in figure the installation will solve this problem. According to the magazine “Popular Mechanics” (USA)
In the “M-K” № 8 for 1988 has published an article about the restoration of the working head Wellenreiter. Offer an easier way to “restoration” with one or two tubes of lemonade or mineral water with a drilled center holes. N. KONONENKO, s. Lozova, Kharkiv region.
As a rule, furniture shelves mounted on pins inserted into holes of the side walls. These nodes can be improved: choose in the shelf a groove into which and hidden support. In addition, such attachment will prevent the shelf from the possible displacements.
During repair work the goats are not always required, so many people prefer to do without them, making a pyramid of chairs, stools and table.
Use the cutting Board is much easier, if equipped with side handles made of aluminum corners. And to prevent sliding of the boards on the working surface of the table, for example, during rolling the dough, add its four rubber feet. In this capacity, suitable cork from the bubbles of the type of “penicillin”, privernuty Read more…
The one who had the opportunity to disassemble a conventional magnetic latch for a door, must have noticed how strong the magnet used in it. This leads us to the idea to use magnets instead of springs in the front suspension trace model. This is done as shown in the figure. Frame our model — box, welded from sheet metal, rigid and light. Front suspension — oscillating arm transversely of the wire. Axle nuts attached to the fists, bent in the shape of a triangle made of tin. The wheel turned, the tires of sponge rubber.
Originally solved the problem of production of the fairing for racing córdoba in the box O. UFOs from the city of Ilyichevsk of Odessa region. He refused a long and laborious work with wood and uses ready-made parts — housing from industrial plastic kits. copies of the aircraft. It is only necessary to reinforce the thin-walled shell in intense areas with fiberglass and epoxy resin, and cut the lower part of the fuselage. Best suited case from a large transport aircraft, the keel is either not trimmed or shortened.
