And painted on all sides, and then dry without damage to the plane and edges of the panel will allow… regular nails gently hammered into her top and bottom. Set at an angle to the wall, the panels will not touch neither the floor nor the wall surface.
In winter, a suit for window boxes”refrigerators” to store perishable products. It is not very convenient for many reasons: it is necessary to open the Windows; the produce into the machine. However, this same box can be set just on the windowsill, and to it through the frame to drill a few holes with a Read more…
A simple clamp will turn any table into a workbench, if on the edge of the bracket with a triangular file to cut into sharp teeth which will securely hold the wooden parts in the processing of their plane.
To protect the glass Windows of a country house remaining empty for the winter, is to make plug-in boards of the wooden slats of the type of fence. Bring them down on two bars in the size of the window is not difficult. To mount the shield on the window long through bolts, the nuts Read more…
Fall on the overgrown around the pond Bank on clothes to nacelles seeds series. Brush cleans the clothes from seed very bad. Helps file with an average (not small) notch. Sliding movement of the rasp surface of the clothing remove the seeds series. Hooks V. hooks.
To lower or to raise from a well or wells cargo will allow here is a simple fixture. It consists of two stakes and relying on a steel rod with a diameter of at least 30 mm, with a cranked shank handle. Support stakes must be securely buried and located as close as possible to Read more…
Hang a hook or bracket to a hollow wall (for example, sheathed with plastic or plywood) is always a problem: fixture does not hold in this place is quickly loosened and popping up. However, such a charge would be reliable, if drilled in a wall of the notched hole to insert one end of thin Read more…
The magazine offered rings from rubber gloves to use for the “tying” of packages. You can use wider rings for sealing the junction of bottle-stopper — is of the Board fluff clay, because he is with the hours that use can get into the contents. Tried to apply the rings of the gas tube, but Read more…
If you want to twist the doubled wire, use the shown ways. Depending on the thickness of the wire, select the appropriate option: for a slim fit and a makeshift reamer with sewing coil or hand vise watchmaker, and for thicker hand drill.
Often in the manufacture of the part to measure the depth of the groove or a blind hole and there is no caliper with depth gauge. In this case, but you can use a conventional ruler and the rod of a ballpoint pen. By setting a ruler on the plane parts and attaching the rod, Read more…
