Power plant in a backpack
It’s getting dark. The sun is slowly setting towards the horizon. Dusk is coming. It’s still early to go to bed, I want to read and play chess. For motorists, energy for lighting is provided by a rechargeable battery. But hikers can also use electric lighting with no less success – a pocket wind power Read more…




Unfortunately, on vehicles of most episodes of “Zhiguli” are not put neither ammeters nor voltmeters, although sometimes there is an urgent need to monitor the battery condition. Produced by the same industry switches instrumentation is bulky and unsightly, and the price is commensurate with the price of parts developed by me homemade digital voltmeter that allows you to control the system voltage in the range of 10-16,3 V, accurate to 0.1 V.
People sometimes just have no time to twist knobs of the receiver to switch from one frequency to another. Here comes the advance settings of some of the most popular stations, pressed a button and listen to the desired program. In this mode you will be able to work any long-wave radio with a homemade console, designed for several fixed frequencies in the range of SV.
Development and manufacture of printed circuit boards for a single instance of a homemade device with a higher density of mounting becomes sometimes a problem even for the experienced radio Amateur. I have also found the opportunity to do without any preliminary layout of printed wiring conductors, and even without soldering electric and electronic circuits. I replace all of that… wrap.
Existing acoustic system (as) furniture type mostly rather cumbersome and expensive. To use them when testing and setting the audio uncomfortable. And in ordinary surroundings while listening to the radio and music are often given preference more simple and accessible to speakers of small capacity, including homemade, produced from scrap materials.
Many people when buying a new and advanced gadget I hope for a long life, but in reality it is not so. Due to the fact that the tablets are technically complex device that causes of failures can be many.
Debugging any program of the microprocessor, it is necessary many times to write and erase information in the chips ROM КР573РФ5 (РФ5). However, the online those is very limited. In the end — quick exit of the chips from the system.