There are many simple homemade designs boat, but mine is probably among the most simple. To make it was not difficult: me and my friend Sasha Silantyev took this for two days. And the work was as follows. First of all, with the usual clamshell removed the tarp and springs, and also, cut the rivets, the arc of the headrest. For the longitudinal framing members used a tube from another old clamshell. To blend with a transverse pipe of the framework we came up with, we think, quite an interesting way. After cutting at the end of each longitudinal pipe is made semi-circular notch. At the point of joining on the transverse elements wound through three or four layers of textile adhesive tape and placing the longitudinal pipe, pulled the frame to a steel cable.SWIM IN “COT”
There are many simple homemade designs boat, but mine is probably among the most simple. To make it was not difficult: me and my friend Sasha Silantyev took this for two days. And the work was as follows. First of all, with the usual clamshell removed the tarp and springs, and also, cut the rivets, the arc of the headrest. For the longitudinal framing members used a tube from another old clamshell. To blend with a transverse pipe of the framework we came up with, we think, quite an interesting way. After cutting at the end of each longitudinal pipe is made semi-circular notch. At the point of joining on the transverse elements wound through three or four layers of textile adhesive tape and placing the longitudinal pipe, pulled the frame to a steel cable.
Remember PushPull fabulous animal which could jump not only forward but also backward, because instead of a tail he had a second head? About it can not help reminiscent of the original bilateral cutter, manufactured by the innovators of the Gorky machine-tool production Association. Tool on a conventional tool holder has two cutting inserts mounted on carbide lining and is mounted to the top clamps. Under the clamps located struzhkolomy.
During the Second world war, Germany was the leader in the development of heavy armored vehicles with wheel formula 8×8. After a good armored car Sd.Kfz.231(8 Rad), which was a frame structure, followed by Sd.Kfz. 234/1 with a monocoque body (see “armor collection” № 1, 2007). For these machines and their modifications was characterized by the presence of all eight of the steered wheels and two control stations. Four-axle, or, as they are often called, vosmiklasnica armored vehicles have been successfully used by Hitler’s Wehrmacht in all theaters of war until the last days of the Second world war.
Adjusting the temperature of the local heating using the original heating element. The idea of local heating of a small area is implemented with the help of available details that it will probably in the reserves prudent owner, including, of course, owned and hams. Moreover, as the heating element applied to ordinary fixed resistor with a power dissipation of 2 watts. Depending on the power and resistance of the constant resistor can be achieved heating limited site to a temperature of -40 °C or even 60 °C.
Design domestic car GAZ-21 “Volga” is haunted by the many fans of this car. Some create precise scale models-copies of this iconic sedan. Others meticulously and carefully recreate the published in the edition of luxury vintage cars, which today look better than the ones that came off the Assembly line 50 years ago. Well, while others using a fundamental design decision, so happily found in the design of GAZ-21, creating the “explanation” of this car an exclusive design.
In recent years, rakotomalala all levels are fond of a simple “building” material for flying model — plain paper. The journal “Modelist-designer” told you about the paper models on their pages. And if earlier to make the model only of paper required regulations, today this material is widely used “voluntarily”. The proof starts at the all-Russia competitions on the Cup of S. P. Korolev. About 40% of the participants in the classes SA and Ѕ6А used the paper model. Our story about the rocket champion in the class of parachute models (SA) Denis Gaganov (Sergiev Posad).
From circular knives, no matter where they worked in agricultural units, in the fields or in industrial plants, — wear out really fast sharp working edge. Therefore, innovators tend to find the most effective method of restoring the load of the tool.