BMW 645Ci Volga

BMW 645Ci VolgaDesign domestic car GAZ-21 “Volga” is haunted by the many fans of this car. Some create precise scale models-copies of this iconic sedan. Others meticulously and carefully recreate the published in the edition of luxury vintage cars, which today look better than the ones that came off the Assembly line 50 years ago. Well, while others using a fundamental design decision, so happily found in the design of GAZ-21, creating the “explanation” of this car an exclusive design.

Read more

SPORTS “WEAPONS” — FROM PAPER

SPORTING In recent years, rakotomalala all levels are fond of a simple “building” material for flying model — plain paper. The journal “Modelist-designer” told you about the paper models on their pages. And if earlier to make the model only of paper required regulations, today this material is widely used “voluntarily”. The proof starts at the all-Russia competitions on the Cup of S. P. Korolev. About 40% of the participants in the classes SA and Ѕ6А used the paper model. Our story about the rocket champion in the class of parachute models (SA) Denis Gaganov (Sergiev Posad).

Read more

AT THE START OF THE “STRATOS”

AT THE START OF THE Have trace modeling particularly attractive trait: despite the relative simplicity of the models, they give space for the creative work of the children’s thoughts, development of design imagination. An illustration of this situation can serve as our mug on the car model “Stratos” (Fig. 1). Recently Moscow plant “Young technician” started to produce the engine of DP-15. He has two obvious advantages: its capacity is sufficient to move the model, and it is quite affordable. Another plus: when calculating gear, you can focus on the spur gear for electric shavers that are sold as a spare . parts. Cons — size and weight — when novice modelers can not be ignored.

Read more

SeAZ-11116

SeAZ-11116The car VAZ-1111 “Oka” was put into production in 1988 — assembling the machine was carried out at the Kama and the Volga factories. Further production of the car and joined the Serpukhov car factory, which produced the first machine with manual control. “Oka” is a front wheel drive car midget class (its length is 3.2 m), fitted with a 29-horsepower two-cylinder engine working volume 0,649 L.

Read more

FOR THE FUTURE

THE FUTURELife has convincingly proved advantage of education, is closely associated with the labor education and professional orientation. Knowledge and work are inseparable, the Only way children and youth develop the necessary moral qualities, active life position…
 
From the report of the Komsomol Central Committee to the XVIII Congress of the Komsomol

FIXTURE AUSTERE

The picture is not changing over the centuries: two sitting opposite each other, in the hands of one — tangle with pregen, at arm’s length other — carefully straightened coil. Is it possible to exclude one of them, well, at least one who holds a skein of yarn? It is possible, and tools exist for Read more…

SHAVEN GLASS…

How whereis when painting Windows, what precautions apply no glass will still stain. For cleaning everyone has their favorite method and device. Many use a razor blade. But few who obviously came to mind to insert him how to shave, work hard with the handle. Try it, very convenient fast and safe.

BROKE AND WORKS

BROKEN BUT WORKSBROKEN BUT WORKSBlade of the hacksaw on the metal is quite fragile and often breaks. The lean master will never throw away the debris: manufacture of them auxiliary short nail file, a knife, a Bong.
 
I use a wad of wreckage as dracopoli file. Take 5-10 pieces, strung holes for any fasteners, and the other end with electrical tape to make the handle. A replacement file is not clogged with sawdust during operation, it is not necessary to clean with a wire brush — rapped about something, and you can continue the operation. It is particularly convenient to use this tool for soft materials: plastics, putty, non-ferrous metals, wood.

Read more