I thought: and what room, when we go home, we are often the longest? For women, in my opinion, this is the kitchen. Man, even the most caring, here only helps, plays only a minor role. But can play the main… in the landscaping and kitchen equipment, particularly small ones, where it is so easy to place a pile of various utensils. But we now require that the aesthetics were in attendance, and it was convenient to use, and the area is rationally distributed functionally, and to some meters remain free. Let’s try to count what they leave, if they, say, only about six.
Read more
Most often the chassis of modern highway car made of metal. In the case are tinplate, thin sheet duralumin and brass, steel wire. Requirements and the chassis is presented are many, and each new version is to some extent intended to satisfy them. Designs, at the same time perfect in all respects, have not yet been.
For school discos and Amateur recording magazine “Funkamateur” (GDR) offers a scheme of five “anal stereomixer (Fig. 1). It is designed to connect two stereophonically (X1, x2), two stereos, (XS, X4) and one microphone (X5) for a soloist or a master program.
MATERIAL: metal rod Ø3 mm, a rod of square cross section 8X8 mm, flat metal section 2X15 and 3X15 mm, plywood 10 mm thick, thin plywood, mirror, screws 4×10 mm, colorless furniture varnish, wood glue, primer and paint.
In the Soviet and foreign scientific and popular journals have repeatedly reported Nicoleta apparatus-ekranoplan, including the Soviet pilot the rescue boat amphibious ESKA-1. This car is Amateur-built successfully last cycle of flight tests, designed by Moscow engineers Gramatzki A., E. Grunin, S. Chernyavskaya, Y. Gorbenko and N. Ivanov. Flight tests were conducted by an engineer A. Gramatzki, and then the pilot Baluev A.. ESKA-1 was exhibited on one of the Central exhibitions NTTM was awarded a bronze medal VDNH USSR, and its creators — signs of the winners of the NTTM.
(UNIVERSAL MACHINE). Replacement of manual mechanical tools is of great importance not only in manufacturing, but in the home work of the designer-lover, embodies with wood and metal in their designs. Sometimes even the most simple fixture, primitive stanochki significantly speed up the work, facilitate it and to dramatically improve the quality of the product. That is why in recent years an increasing number of miniature machine tools for processing wood and metal, designed for hobbyists and tinkerers.
This is a small children’s table with a sloping cover. Leaning back, the cover opens sufficiently spacious inner box; it can be divided by partitions into several compartments smaller. The basic material for the desks — planed pine boards with 20 mm thick Top cover size 650X550 mm glued from several boards connected just butt in pile or with two or three spikes. In all three options until the glue necessary to hold it in a compressed state, and monitor the screed: it should not cause any warpage of the set; the boards when assembling for the same purpose, should put the year layers in different directions.
