For the fourth year keep the potatoes on the balcony in a container of foam slabs of size 900X 900X 90mm, strapped together by means of aluminum corners section 25×25 mm and length of 950 mm and steel pins ø 8 mm (Ø = 950 mm). At the ends of the studs is threaded M8. In places the joints are glued shopon thickness of 5-8 mm for sealing. The cover is pressed against the two lever locks and can be removed. Locks mounted on two metal bands spanning the box around the perimeter (Fig. 1).CHANUNAVAIL FLOWER GARDEN
Offer for all lovers of the cultivation of flowers on the balcony and very simple design Flower pots serve plastic containers of shampoo or other detergent with cropped bottoms. And ia the shelves they are fixed by means of threaded plugs.
The idea of building a jeep because we like an active holiday. The basis was taken of the legendary Soviet car UAZ-69. Since it was planned to overcome the car is not only cool roads, but long distances, over “UAZ” had to work hard. At first it was disassembled “to the last bolt” and reviewed.
If in the famous Guinness book of records recorded the simplicity and manufacturability, today we present to your attention a model would be the first contender for such a record. Especially attractive it is for young athletes. This model is a “bouzouki” with the engine working volume of 1.5 cm3. And all that will be needed for the manufacture of its frame, — a little more than five meters pine slats section 3X12 mm. They are easy to saw on the machine “Skillful hands”. The weight of the rails is about 100 G. Hence, with a relatively large wing area (dm2 21) it is easy to achieve a low specific loading and good maneuverability.
Not long ago I discovered, in his home workshop old Microdrive MK-12-In, preserved, apparently, since childhood. What to do with it? Throw a pity, and here decided though somehow to use.
When repairing thin lines (such as a car or refrigerator), it would be good to have on hand a small pipe cutter, and for connection of pipes with swivel nuts — device for rolling. Not hurt in a home workshop and a small vise. All of these devices can be made in the form of a set of interchangeable tool based on a simple clamp of suitable size (or specially manufactured). The design will need slight modification for mounting of tools for different purposes. In the first place must be milled afterwards the groove under all replacement fixtures (cage support rollers, rolling, vise) and drill a hole for the stopper.
Wallpaper — this word spins, usually in the head before the repair. Wish they were beautiful and fashionable, to blend in with the furniture… But run around shopping, not always pick up something about the dream. You can, of course, triple the quest to connect friends and friends… We invite you to direct your efforts in a completely different direction. Buy white emulsion paint and a few jars of conventional art gouache — and you forget what part in the shop “Everything for home”.
Bike “Tourist” lives up to its name. He’s not heavy, quite durable, easy to move, has a good ergonomic proportions, fitted with four-chain transmission; it may be two racks, generator with headlight, speedometer, rear view mirror, audible signal, reflectors and stand. The best rating is a big demand for it, which, unfortunately, is not satisfied the domestic industry.