The idea is to share my experience with the readers of “M-K” came to me after reading in No. 2, 1991, notes In Cmaha catching “a Plane on the rails” I Believe that in contrast to the above my design “rails” more comfortable and versatile, and time-tested. The basis of the frame of our “bench” consists of two steel channel with a length of 8 meters and a height of 140-150 mm…For “the same purpose you can use two rails, turning their soles to the top, or corners 50 X100 mm. Workpiece must be perfectly straight. One in cov ω distance in height and with a pitch of about 1…1.5 meters for all channel length RTSD drilled holes with a diameter of 14…16 mm.
HOMEMADE SAWMILL
during the period covering the country’s public deficit even the most that neither is ordinary iron burst in a number of regions in the category of “trudnoreshaemyh”. And is — alas! — quite expensive. But for the resourceful craftsman to make the original iron, as they say, no problem. You only need to thoroughly want… unlike the hero of the once popular song where the words are in the title of this material, the success of saadeldin guaranteed.
Modelers often have certain difficulties in acquiring light and noiseless gears, wheels, propeller, and propeller and other parts for improvised structures. At the same time, these problems can be avoided if prudent, businesslike now use a throw away to landfill discarded, worn-out nylon products, old plastic items and other “synthetic stuff”.
When developing this design car trunk, the task was to create a device which, in addition to the normal daily functions would satisfy and lover of outdoor activities — would allow us to transport two sets of boards sailing in the summer and (with minor changes) 5-6 pairs of skis in the winter.