Indeed, an unusual feeder something like the popular image of the alien craft. However, this is only ispolzovana polutoralitrovye plastic bottle, which cut two year old. Through them you can feed and back to bed. For mounting the feeder, simply attach to a tree trunk tube and the bottle to screw her.
In a city apartment, a dacha and in a garden house wooden window frames periodically require ponovleniya & painting, glass — coating or replacement if cracked or broken. All of this is easy to perform on their own, with our recommendations (on materials of foreign seal). If the window places the paint was peeling or inflated, do not rush to re-paint, first prepare the surface.
Beginners only pilots first, as a rule, “fly” for simple models, is designed for small “cubic capacity” of the engine. They learn to manage to work out a complex aerobatic figures. Over time, performance of simple models no longer satisfy them. There is a desire to build a more serious and heavier the aircraft under the engine more “cubing”. And this is not surprising because in such a model, the flight characteristics much better.
Any upholstery work carried out from ladders, is difficult because you have to constantly climb in pockets for supplies nails, and even down behind them. But the solution is simple: enough to attach to the top of the stairs a magnet — and it will securely hold a stock of nails is always at hand.
Getting to self-designing furniture, I set a goal to achieve maximum adaptability to design was designed, manufactured, and operated with the lowest cost. I designed a set of furniture for a Studio apartment meets this requirement, I think, according to the following criteria.
Model glider, which we would like to tell the readers of the magazine, was built of the most simple and cheap materials. I think that its design will be of interest to novice modelers. After all, despite any economic problems, the fascination of students with model airplanes has not waned, and only the lack of materials needed to make models that can reduce infantile interest in it.Our model of a glider was built and tested in the fall of 1998. It is easy to manufacture, easy to debug, and makes a beautiful long flights. Well, it can be done not only in the aeromodelling circle, but also at home.
When saw off part of the thread of the long bolt (screw, stud), in place of sawing produces burrs, dents. This makes it difficult to time the screws when screwing. The matter is simplified if the threads are pre-screwed the nut, and then trim the bolt. When removing the nut itself will remove the burrs.
