Aim to make brisk, reliable and compact tillers. This mechanical helper and was gardening, and the garden is plowed, and beds cut, and the potatoes on the home field were planted, and seedlings are weeded, and the crop was removed… And most importantly, to run this technique, sitting in a comfortable chair and never feel tired. Not to say that once, but the idea was a success. For three years my homemade motor-block (MB) is, as they say, faith and truth. I called it “Pony.” For endurance, reliability. The only thing he requires is gasoline.
PONY PLOW AND CARRIES
We continue to publish models of rotochutes — winning flying competition for the Cup named after S. P. Korolev. Model Cup holder yurtaeva S. (Moscow) are described in the “Modelis-the-designer”, No. 4, 1999 Today we offer developed by the Tsentr detskogo tvorchestva g. Nizhnekamsk, under the leadership of teacher A. N. Rossiia rotocut, which was the prize-winner of these competitions V. Stolyarov. Model rotocut class Ѕ9А — lobed. The fuselage is in two parts: the rod and propulsion of the container; the connection — telescopic.
There are cases of disconnection of water in homes for a long time not only for repair of water system, but also for its economy. Such breaks is fraught with the danger of flooding the entire apartment and the neighbors left unclosed tap, what’s going on not only in a hurry or distraction, but because of the lack of water in the pipes and hence the impression that the valve is closed. It is easy to imagine the consequences of a sudden resumption of water supply in the absence of the owners of the apartment.
Self-propelled chassis, called the “Bull” that I built over ten years ago. For such a considerable time of operation the machine showed itself unpretentious, reliable and workable. The layout of its classic truck body front, the driver’s seat (in this case it is open) and the engine — rear; front axle — steering, rear — host. “Bull” is primarily designed for the carriage of goods weighing up to 500 kg with a speed of 35 km/h. But it is possible to work the ground. We only need, say, before plowing to replace the sprocket gearbox for a large, which will give increased traction, and attach the plow. Also, using a PTO shaft to hook up and operate a circular saw, water pump, mower, etc.