Offer your variant of the design of the armchairs, on the basis of which you can make a new seat or redo is available. In my order was old, from a set of upholstered furniture “Narspi”. Alteration it was. The seat of a chair (Fig.1) at an angle — I had to make it horizontal. Below him to both sides of the seat put two strips 4 which serve as guides for the sliding part of the lounger. To increase the stiffness of the main structure side of the chair connected crossbar 2 and the rear panel 5 (used the existing chair). Connection — with the help of furniture parts and screws. Retractable parts are collected separately.
However, it can be made more versatile if the blade is cut, as shown in the figure.INSTEAD OF SPLIT
For reliability of bolted connection in terms of vibration under the nut usually enclose a split spring washer: its sharp edges prevent the loosening of fasteners.
THE PATCH FOR THE BATH
The damaged area of enamel in the bath, you can restore yourself. To do this, first clean it with sandpaper or an abrasive stick to metal, wipe with gasoline and allow to dry.
THE FIT AND PENCIL
Even if storage together with small tools marking pencil will not lose the sharpened stylus, if it is to protect your cap
HOLE WITHOUT A DRILL
How to get a large round hole in the soft and thin plastic? Instead of drill it is convenient to use an ordinary drawing compass gauge: one of the two legs are sharpened the blade and upon rotation
TOOTHPICKS
Someone impale them on sandwiches, someone makes them reduced copies of famous buildings, and some use them as intended, to remove stuck food between teeth. Welcome to the factory where they make modest zubachistca. Raw materials for toothpicks the most simple – logs, lots of logs, or rather of birch wood. The transformation of the Yule log begins with the separation of the bark, bark is not suitable for the manufacture of toothpicks, but it is not wasted, it is sold to a nearby factory where it is used as fuel. The log is processed on the machine twice, the result takes the form of a right cylinder, convenient for further processing. A special machine turns the log like a roll of paper simultaneously slitting thin layers dvenadtsaty sharp blades.
MODELIST-KONSTRUKTOR 1966-04
IN THE ROOM:
So I decided to Plenum (2);
Gathering passionate about. Taranowski V. (4);
The model paves the way. ‘ev L. (5);
A TRACTOR WITH A HINGE
A mini-tractor, which will be the story for the third modification of my DIY construction, originally designed as walk-behind and built by me in 1985. It was the car with the power unit of the motorcycle “IZH-Planeta-4”, equipped with air cooling system and is equipped with an intermediate chain reduction gear. Tillers were intended mainly for the cultivation of the earth. For the transport of works behind him was poicephalus single axle truck with the seat and the body. Truck wheel was, of course, not leading. Reverse tillers also had and with it I felt it is not easy to handle, and realized that he largely loses the tractor.
MIRROR FOR BIRDS
In the second half of the summer birds of the defenders of the orchards and gardens of our loyal friends turn into worst pests, causing considerable damage to crops of fruits and berries. The most simple device to scare away the winged tooth is considered to be… the mirror. You only need to get it to rotate — this flash sunbeams cause the birds to leave free “dining room”.
