For successful fishing it would be nice to to good gear added luck, but still; as they say, “gotta know”. And if luck is fickle thing, then the place where the fish, I knew. But to get to them sometimes was difficult, and “equestrian”, and even Hiking. and there was only one way — by water. However, this would have at least some boats. So I decided to make a simple fishing boat.“GLISSER” ANGLER
For successful fishing it would be nice to to good gear added luck, but still; as they say, “gotta know”. And if luck is fickle thing, then the place where the fish, I knew. But to get to them sometimes was difficult, and “equestrian”, and even Hiking. and there was only one way — by water. However, this would have at least some boats. So I decided to make a simple fishing boat.
A simple actuator that turns ordinary wheelchairs into self-propelled designed for small business “Electric” engineer A. COHOM. The device is simple enough; to make it even in the apartment, without the use of special tools and materials. As the base used, the most common and reliable wheelchair wheelchair model “400” production of Stavrovskiy plant, although you can upgrade so any.
Control line racing model class 2.5 cm3 designed and manufactured in a self-similar laboratory of the Palace of pioneers and schoolchildren of the Pervomaisky district of Moscow under the leadership of A. Pyatibratova. Model — winner of national Championships in 1977-1978. Designed for engine KMD-2,5, diameter of wheels 80 mm. With properly adjusted and well firmed engine model of this type at speeds of about 170 km/h Special attention during development was paid to reliability of all units.
Epoxy adhesive, as is known, consists of two components: resin and hardener. Before use, the components are mixed in the ratio of 8 : 1 (by volume). It’s easy, especially when the operation is performed with a sufficiently large amount of resin. But sometimes (especially modelers) need only a few drops of universal glue. Observe in this case, the necessary proportion between resin and hardener is not as easy as it is a very meager number of components necessary to measure at the same time.
Before starting work, carefully examine the drawing and description. Then prepare the tools: small plane, a sharpened knife, pliers or pliers and a jig saw with saws. Materials you will need: a pine rail, a small sheet of tinplate, paper, spool of white thread No. 10, plywood thickness of 1 mm and 3 mm, or micuenta tissue paper or polyester and nitrogly (it may be enamel, “AGO”, supercement, etc.).
In the past year (“M-K” No. 5 of 1979), we introduced our readers to the technology of refinement of microelectromechanical DI-1-3 and EDR-40 to install them on a flying model. The article evoked a wide response among modelers. Yes, otherwise it could not be: after all, nowadays, no one not vysavac>1 doubt the prospects of application of electric motors not just for cord, but for radio controlled models free flight. However, even the best examples of electric motors are still unable to compete with internal combustion engines primarily by power density, its weight IS1 resident students nutrition.
As soon as the first snow fell, it became clear that the house has no need of such cargo winter vehicle as a sled. Child’s sled for a long time “went” on a well-deserved rest in a pile of scrap metal, and weak they would have to carry the heavy loads.
The voice of the motorcycle or moped is familiar to everyone: a sharp and often as machine-gun fire, the crackle of a motor rips the silence, causing the others to flinch. And harmful effects of the exhausts themselves! With the growing number of these machines increases the degree of poisoning of the atmosphere by exhaust gases. 
Where conventional shovel passes in front of dense soil, this unusual diggers enter the ground like a knife through butter, though the effort inform her foot is almost the same. The secret lies not only in originality of design, but also the new technology of digging remotely resembling a job with a hand drill.
Modern models of air fight as a championship class and “Junior” are in many respects similar in construction and, accordingly, on the concept. They completely satisfy the “fighters” requirements and only differ in the manufacturing technology.