Public Design Bureau
TWO FIGHTING WING
Developed in the circle of aircraft modeling station of young technicians of the city of Berezniki of the Perm region and the following proposed model of “air combat” is designed for mid-level athletes. They are distinguished by a good performance, sufficient strength and manufacturability. But for some modelers who do not have experience with foam lomikami or do not have access to the material of the required quality, it may be advantageous to use as the main material lime veneer (which, as a rule, can be made independently). Both bouzouki built on a “flying wing”, dominant in the Junior class and sports the “air battle” of the last decade.
ERSATZ FUEL “CALLOC”
GENTLE TRUNK
TANDEM FOR TWO, THREE, FOUR
For a basis we took the road bike (with “women’s” frame), set on it a longitudinal beam of the two aluminum profiles-“parts” and fixed on the beam two seats with backs so that the first rider was able to pedal the front wheel drive and the second conventional chain drive the rear wheels. So we got a double bike with the same dimensions that and serial single. Sitting in the front seat rotations”t pedal for more drive, located in the center of the front wheel, supports the balance, and also serves as the driver. The second rider works the pedals, resulting in the rotation of the rear wheel while sticking the handles on the back of the front seat.
DESIGN GYROPLANE DAS-2M
TRACTOR “WORLD ON A STRING”
MOKIK ON THREE WHEELS
Easy tricycle Lama, apparently, ‘ will be the perfect means of transport for many — including for people who have lost mobility, deprived of the ability to walk normally. It is stable, develops a moderate speed — up to 30 km/h, and its one door body, made with simplified technology, well protects the driver from the vagaries of the weather. But most importantly — mokik with the engine up to 50 cm 3 and such a low speed in accordance with the rules of the road vehicle is not, and therefore can be made without a license and without registration in GAI.,
HOW MANY IN THE TANK!
ABOUT VANT-POTENSAC AGAIN
In the manufacture of sailboats on a small scale a lot of work goes into the production of the most likely guys-putenkov. A method of simplified simulate these parts and nosing integral from a single piece of metal. The use of a special mandrel (Fig. 1) allows to achieve good results both in accuracy and in appearance.