On a conventional two-wheeled Bicycle much gear not to take, even if it is equipped with a trunk. Meanwhile, the need from owners of these machines frequently. It is therefore advisable to make to the bike trailer.On the construction of such a two-wheeled trailer said Zbigniew Hyun-nel and Andrew Fedoruk in the Polish magazine “Mlody TECHNIK”, article from which prepared this publication.
The Russo-Baltic wagon factory (RBVZ) became the leader of Russian automobile industry in the early XX century. Founded in 1874 in Riga, is a large engineering company produced steam and horse threshing machines, seeders, plows, stationary oil and kerosene combustion engines, passenger and freight cars, trams, artillery limbers, and, later, cars and airplanes designed by I. I. Sikorsky. By 1912 the territory of the company, has a capital of 9.6 million rubles, was already 20 acres, and fifty shops of the plant worked 553 of the machine, which worked 4,000 people.
The snowmobile, which, the story goes, collected the tenth-grader Sergey Sorokin from the Altai village of Ust-Kamenka. This is not surprising. Equipment guy is fond of since childhood – for eight years, he has been in the CCC (children’s creativity Center) to the circle of “Small appliances”. In a compilation of drawings and design layout and transmission schemes of machine assisted group leader Viktor Aleksandrovich Kurbatov. Responsible welding works helped to run his father – Boris Andreevich. Everything else until the processing of parts on machine tools, has fulfilled himself. In total, Sergei built a snowmobile for about a year, the Assembly took almost four months, from autumn to spring. And until the snow melted, I managed it only to test, “Ispahan” everything drifts around the house. But now revealed some shortcomings, which for the next season is going to be eliminated.
An activated by an electric current of water appear special properties: such moisture has a significant influence on the course of redox processes in animate and inanimate nature. Using the activated water, the enthusiasts achieve success in a wide range of areas from production to consumer (publications on obtaining “live” and “dead” water, see the journal “modelist-Konstruktor” № 12’83, 3’87, 3’96, 12’2000). Today’s collection is about the activators that can be done in a home workshop, based on the materials of the popular Bulgarian weekly “Guide yourself.”
The owners of the garden plots are very popular cultivators “the Mole” with petrol engines. At first I was extremely happy with his mechanical assistant. However, over time, decided to get rid of the noise and noxious exhaust of a gasoline engine and make environmentally friendly electrochlorinator, safe from shock. For the cultivator required a motor with a serial excitation, which increases as the load increases and the torque. More other ideal starter stamps ST-8 from the truck GAZ-51.
I read in the journal “modelist-Konstruktor” No. 6, 1993 article “Vitamins grow on the balcony.” From her I learned about the use of pyramids of old tires as a vertical garden. Intrigued by the experience of enthusiasts, I decided to also do balcony gardening. And came to the conclusion that instead of natural soil in bulky tegmental pyramids it is better to use hydroponics in a separate biomodule.
The journal “modelist-Konstruktor” I write a since 1985 and have never regretted it. Read everything from the first page to the last. Very useful and interesting publication. And though time is now difficult, and the cost of the magazine is not so low, will it write in the future, because I believe that the value of the log above its price. The journal regularly and in sufficient volume published drawings of armored vehicles, planes, cars. But, unfortunately, rarely describes the production technology of models and designs equipment and devices, without which hampered their establishment.
