I’ve been a longtime reader and a regular subscriber of the magazine “modelist-Konstruktor”. For nearly forty years, not only got acquainted with the machines and mechanisms for designers and fans, but also created their. So we can classify themselves as a cohort of “DIY” with the experience. Built mainly teleoperative and transport equipment (walking tractors to monster trucks). Something from a previously created dismantled or altered, some sold, and some exploit until now, for example, a mini-tractor (or rather, self-propelled chassis), which design and present to readers.
Read more
In recent times in the aviation modeling is increasingly being used by electric motors. This is understandable, their advantage in comparison with internal combustion engines is obvious: easy launch, precise control of the screw rotation speed, no exhaust, low noise.
On 37-th Moscow city competition of young men in the micro models, held at the tennis court “Dynamo”, the attention of fans and athletes drew suddenly appeared in the air brightly colored model airplane. She almost silently circled the ceiling of the court, and after a minute or two gently landed. On refilling the tank and running the engine only took 30 seconds and was again in flight. This model installed on the original engine it says the author is the head of the aircraft modeling lab of the Moscow House of young technicians of a name of P. I. Baranov master of sports I. SHKALIKOV.
How to be autoconstruction mug? What it should build cars? How to organize classes? These and many other questions were raised in the recent publications of M. Larkin, and L. I. F. Rychkova “Project — model — car” and “car Designer — car designer!” (“M-K” № 1, 1979). More of our readers interested in the technical side of things — the device is modular inputs to directly affect. Today we offer the latest development autoconstructor laboratory Cut of the Siberian branch of the USSR Academy of Sciences — the micro-car, only “Protein”.
Successfully participated in Izhevsk in the Russian tournaments (1978) on experimental models of type “a flying wing” command of Leningrad. All the participants become
Easy to manufacture, high speed and high manoeuvrability are the main qualities of this model. It fully meets modern style of air combat. The Antonov an average skill can make it ten days. The greatest investment of time will require the fuselage. First saw mount made of plywood 10 mm thick, then cut in the end: glue the pine strips of appropriate length, cross-section 10X3 mm. In the rear edge of the wing and stabilizer put the glue on the fake insert. The interval from the motor to the first insertion complete the rigid foam and the tail boom braces reinforce the phony. Outside (to the side surfaces of the slats) glue fake veneer.
In aeromodelling clubs of the pioneer of the Kominternovsky area, obsut and Kharkiv high school № 112 in a few years, work is underway on the co-axial model helicopters. Their designs are different, but they steadily fly. The following model is one of the latest versions. In the competition “Experiment 78” in the class of timed models of helicopters, she won first place.
This little torpedo boat continues a series of models for competitions. The model is simple to manufacture and has good driving characteristics.
In our home the garage there is a well-worn snowmobile “Buran”. I’m not going to Express their attitude to it in General, because the views of the owners on this issue diverge. However, the work of his heart — the motor always caused not only anxiety, but also from year to year required surgery. Every summer, making these “sleighs” for the winter season, in the engine due to wear and something changed: the rings, liners, pistons.
Who more who less, but there is a need to transport long or bulky cargo which does not fit inside of the car.