Now in woodworking is widely used PVA glue, which is better grasped when heated. For finishing flat parts with veneer is easy to do: you can for example use an iron. Also for curved surfaces to apply it harder. To warm up, say, pasted on the PVA strips of veneer on a curved edge of Read more…
You know how easy it is to collect small metal parts or shavings with a magnet and then how difficult it is to liberate them from the magnet itself. The matter is simplified if the magnet is to invest in a plastic bag. Enough after collection remove the bag and take the magnet — all Read more…
Fall on the roofs of garden houses and cottages, indoor wavy slate, accumulate a lot of fallen leaves. Wet she sticks and prevents the gutter, and in the winter and spring immediately prevents the formation of snow. However, no shovel, no rake is not suitable for cleaning a roof. Rescue scraper, knocked together from scraps Read more…
Even a teenager will be able to cope with a large metal flask of water or heavy gas cylinders, driving them to the house without the help of a truck, but only because that’s such a simple removable device from the wheels of the buggy. Quite a few to bend the axle and weld it Read more…
Indeed, an unusual feeder something like the popular image of the alien craft. However, this is only ispolzovana polutoralitrovye plastic bottle, which cut two year old. Through them you can feed and back to bed. For mounting the feeder, simply attach to a tree trunk tube and the bottle to screw her.
Any upholstery work carried out from ladders, is difficult because you have to constantly climb in pockets for supplies nails, and even down behind them. But the solution is simple: enough to attach to the top of the stairs a magnet — and it will securely hold a stock of nails is always at hand.
When saw off part of the thread of the long bolt (screw, stud), in place of sawing produces burrs, dents. This makes it difficult to time the screws when screwing. The matter is simplified if the threads are pre-screwed the nut, and then trim the bolt. When removing the nut itself will remove the burrs.
In the inset lock on the door in the jamb groove so that the bolt hit it when locking. The correct location of the groove to define is not so simple, but the widening it is undesirable. But if in the place of the alleged cutout to stick a thin layer of well-kneaded clay, the Read more…
In wall weekly that’s for sure indicate that this sliding arrow with a window cut out, for example, of cardboard, glued back zasypkoj of the same material.
If you want to cut plywood circular disk or to cut a hole in it large diameter, it is not necessary to have a special cutter or a jig saw. Take a wooden bar and two grozda. One beat her to speaking on the sharp end was in the center of the proposed circle. And Read more…
