I read in one of the rooms “Modeller-designer” about repairs clasp-Ki-zippers on jackets and I want to share my version of her vosstanovleniya. Often at the bottom of the zipper comes off hvastovichi inserted into the lock. You need to clean it a groove into which is pressed onto the tape “lightning”, and insert epoxy Read more…
If you want to cut the pipe lengthwise into halves, it is necessary to outline its diametrical plane. It’s easy to do and without any measuring devices by using a sheet of paper. Attaching it to the end of the pipe and outlining a circle with a pencil, then cut out the circle and fold Read more…
Shaver with its long cord is very inconvenient for storage. But this simple device will make it convenient. On a plate of soft metal or plastic check with a cap of the razor its outline and cut it out. It remains to bend the workpiece as a shelf – get a bracket that will allow Read more…
There are cases when after oblique impact arm break in two next to the hammer, resulting in not only loss of the tool or of the workpiece, but also serious injury. To avoid this unpleasant event, it is necessary to worry in advance and welded to the hammer cut flattened to oval steel pipe. The Read more…
In this role, the scissors there may be in those cases where it is necessary to mark out the surface measure equal segments. It is enough to fix the ends of the scissors between two wooden slats, holding their bolt or just firmly pulling any cord. In this position, the scissors can be a circularly-cut Read more…
Arsenal of nozzles for vacuum cleaner can be recharged for more homemade — from a Bicycle saddle. A small segment of it, put on the end of a metal pipe-duct will help to clean hard to reach places corners, cracks, embossed surface. In addition, this soft head will protect the surface from scratches. A. GUSHCHIN, Read more…
Several plastic buckets, such that you can hang on a few screws, and the same number of rails, nailed to a wooden pole, and improvised a bed, almost no space, ready. Only need in each bucket to provide drainage drill some holes in the bottom. To grow such a “flowerbed” can be not only flowers, Read more…
When working with a chisel or punch every blow of the hammer thereon is given in the arm. Suggest on the neck of the tool to wear a rubber tube of the right diameter hose. This will protect the hand from discomfort. If the tube is big and the other not, it is possible for Read more…
If a barrel is poured in the vegetable garden or cistern in the shower — the water level in them will tell you a simple water-measuring device consisting of a Styrofoam float and stuck to his line or rod with the labels. For greater stability of water-measuring devices are required on the barrel to put Read more…
