Under the heading “advice to the Modeler” magazine “modelist-Konstruktor” No. 11 ’01 published material on how to adapt the radios from cheap toy cars of Chinese production to the remote control equipment, which is lacking in the circles of children’s technical creativity. Penetrating the essence of the proposed technical solutions, I came to the conclusion that the chip KY011 encoder base of the transmitter with a more efficient application allows you to enter two more commands through the use of the 1st and 6th “back-up” pulses.
RADIO COMMANDS WILL BE MORE!
Often the users PC, with a passion for technical creativity, we have to make copies of drawings and face several specific problems. The paper, which made the original, sometimes it’s yellowed, stained, stains. Or bad the scanner reads the image.
I want to share one small advice. I have an old, since Soviet times, wall clock Mayak. In General, a good watch and was exactly, and a good design, and well preserved externally. But one day they suddenly started to lag, and then stood up. First, changed the batteries, cleaned contacts — nothing helped. After an unsuccessful repair, I was told that they have long no parts and, in General, the road them to the dump.
If you find that the remote control system (CDS) import the TV starts to fail, the first thing I usually replace a power supply in the remote. However, it is unlikely that the performance of the system was then restored fully and permanently. Often TVs continue to “act up”: require precise aiming of the remote, not controlled from great distances, do not work with the first button push…
Replacement flyback transformer in TV monitor МС6105 with CRT 31ЛК is, of course, not a major overhaul. Moreover, if the old monitor staff “strojnik” cope with the work, and to change this (very expensive, cranky and hygroscopic) node to the new is hardly appropriate.
