The propeller as the propeller has long attracted my attention. When the “Modeller-designer” were published about cars, it convinced me to make a similar design.
Maybe in the proposed aircar (or rather to say – aeromotor) no special innovative ideas, but the value of it is. he is quite simple and make it possible even for the novice designer, lover from available materials and components using conventional hand plumbing and carpentry tools. Parts that require machine work, almost there. However, the frame needed welding machine.
Design
ECONOMIC “BEZDOROZHNIK”
The machine was conceived as a utility vehicle on which to carry at least small loads for the household in terms of “winter” and the winter terrain.
Made it mostly from materials available at the time available at hand. Well, the power unit of an old motorcycle “Voskhod” repaired, I have been waiting in the wings to be applied in the case. This is the same bike used handlebar, fuel tank and other components. In the manufacture of powertrain and chassis many elements borrowed from the combine “Niva” — from him and the windshield.
TRUCK-SCARCE
For a long time I enjoyed long ago acquired by manual uniaxial shopping cart (unfortunately, information about the manufacturer not preserved). But remember, in the passport on the cart was given data: load capacity — 25 kg weight — 6.5 kg. the Trolley is made, that is, the conscience, the design is reliable, very simple moves from transport to working position, and it happens that I’m on it loads up to 50 kg, that is twice the nameplate figure. Now it is clear that the manufacturer of the truck was safe and resulted in low capacity, as the possibility of a much larger truck. The developer could specify the actual value of the load capacity, but it was necessary to test truck durability.
“WATER BUG” – THE FISHERMAN’S BOAT
Some fishing without a boat? Especially on large bodies of water. Want to make an original, near-silent boat? To business, then.
Look at the picture. Interesting boat, built on the basis of inner tubes and beach chairs, offers the readers of the American magazine “Popular mechanics”. Equipped with oars or a light motor, it is able to quietly move around the pond, allowing silent access to your favorite places. Sitting in a boat, you can just drift or drift along the river, choosing your favorite area.
PNEUMOCOC IN WINTER AND SUMMER
Downhill on sleigh with mountains-a fascinating sport and a great way to relax. It is a pity that this pleasure is available only in snowy winter. Summer, spring and fall on such a lesson can only dream of. However, it is possible to make and such a versatile sports equipment that is suited for skiing the mountains at any time of the year. Moreover, it is not too difficult. However, “Sani” then you need a special air.
AMPHIBIAN ON BED
We present a prototype of the amphibious machine is a device hovercraft (Ohr) under the name “Aerodzhip”, publication of which was in the journal “modelist-Konstruktor” No. 7 for 2007. Like the previous machine, the new machine – a single-engine, single-rotor with distributed air flow. This model is also triple, with the location of the pilot and passengers at the T-scheme: pilot middle front, and passengers – on the sides, back. Although there is nothing stopping the fourth passenger to sit behind the driver – seat length and power rotor setup is enough.
THE AIRCRAFT, F-3
In our city of Kingisepp were gliding club ROSTO, which I have since 1996 worked as a flight instructor. Of aircraft in the club were two light aircraft, four airframe. But they were not new. Money to buy new aircraft or the repair of old growth is no longer isolated. Aircraft equipment came into disrepair, and in 2000 the club was liquidated.
My life in aviation began from the age of 10, when I joined a model aircraft club. The cart worked for a long time and seriously, participated in competitions, received the title of candidate master of sports aerobatic models and aerial combat.
SANI – “ATV”
If you remember that sports cross-country skis designed for movement, mainly for the track, and a wide hunting transcend any snow, it will be very clear what the proposed design is a home-made sled is significantly different from all sorts of store: first of all, that doesn’t require groomed snow slopes. Even quite popular now trehmernye cat “Chuk and GEK” saved on the hill with deep snow, and these can easily rush down, leaving behind only a white cloud and a wide trail. He will emphasize the basic design feature that gives it such “off”.
RECUMBENT IN BOX
Once the attention of mushroom pickers has attracted tourist from approaching trains in bright veloform, helmet with “cello” in the case behind. Removing the box and opening his zipper, took out of it… brilliant frame with wheels. A few motions – and before the astonished mushroom was already a three-wheeled velomobile. The box on the trunk itself – in the saddle, and in a minute a tourist in a strange car disappeared around the bend suburban road…
FULL KVADR
Introducing the ATV, our constant author S. Pletneva from the city of ocher, Perm territory. Once they built the machine indicative of the increased level of development and skills of its Creator. However, judge for yourself…