Antique furnishings you’ll find out soon in a special form and, in the first place, legs. In the old days, Cabinet makers loved to make them curved, not now. At first glance it seems that to make such difficult and not to everyone under force. But do the same people, and without modern mechanization, by hand, simple tools. So, you can try to repeat the techniques of the old masters.
The proposed technology of manufacturing of seats is suitable in the case of repair of old furniture, and when you create a new one. It is equally applicable for both stool and chair, and armchairs. Methods of work proposed by the Hungarian magazine “Earmaster”, as simple as they were effective on the final result. The result is beautiful and quite durable seat. The basic operation is really similar to basket weaving, only in this case is not used willow rod, and a cord, rope, synthetic tube, or even insulated electrical wires.
No matter how small nor was a country station, the cultivation of it requires a lot of work and everyday stress. It must be something to plant, paraklit, Spud. And all this has to do bent over or squatting, why start the back pain or aching legs. Work home grower or grower much easier universal bench, proposed by the Hungarian magazine “Earmaster”. Its versatility lies in the fact that when working in the beds prove to be useful almost all of its component parts – just enough to change their situation. This is considered in the development of simple design of the seat. Judge for yourself.
Many of the materials the born chemicals using elevated temperatures, for example, various plastics and synthetics, more manageable when shaping or processing temperature than the tools traditionally used to working with metal or wood. That’s why for cutting, for example, foam plastic, foam rubber or polyethylene are constructed of various homemade devices and devices in which the main working instrument is a hot plate or wire.
Hard turns (as, indeed, trudnosmyvaemye) fastener (screw or stud) face many troubles, both small and large. The latter can be safely attributed the breakage in the body parts of the stud or screw, as the extraction residue of the fastener from a threaded hole or socket parts is very thin, requires great accuracy. The reasons of breakages of fasteners can be several: excess torque; the use of low-grade threaded products; “welding” of the parts and threads of the fastener due to corrosion or high-temperature heating, and others.
For the workman man a good tool — it is, as they say, is half the battle. For cutting tools (e.g., saws) it is important that it was sharp. With a significant amount of grinding you have to do periodically, and if the material is solid and hard, it is time for this, in General, support the operation, spent even more than the work itself. But, making edits “on the knee”, and get tired quickly and the quality suffers.
Well, if on a country station toilet in the house, not in the distant corner where nailed to his wooden “birdhouse”. But even better would be to to add to it, if not a bathtub then at least a shower, because it too often satisfied in the yard. The original version of the combined bathroom suggested his readers of the Hungarian magazine”, Earmaster”. Only almost one square meter area houses the toilet, washbasin and shower.
To maintain proper cellar temperature and humidity it is equipped with good ventilation. In this case, set two pipes – exhaust and supply air, the lower hole for better ventilation placed in two levels and, if possible, in opposite areas of the cellar. The inlet of the exhaust pipe is placed at the top, near the ceiling, and the supply at the bottom and at a height of 50 – 60 cm from the floor (Fig.1).
In the hallway, even the smallest, there is always a place for clothes – any design hanger and shoes – a special floor rack or kolesnica. Even scarves, hats and gloves possible to attach. And only umbrellas always as restless, especially after rain when they are wet: where to define them? – surely beneath them formed a puddle.
Usually furniture buy identical pairs. For example, two sliding chairs, beds. Over time, they grow obsolete, become an anachronism. Throw them away, but to alter… such chairs, released the same factory overall and mounting dimensions are the same. Because of this, after the dismantling of the side panel (legs) on each product it is possible to join the chairs into a sofa, and even his diagram of the folding-unfolding is unchanged.
