Usually a small supply of potatoes is in the house constantly. Keep it in the cold (which is a large part of the year) in the kitchen: in bag, box or bucket. But such containers, except that is already scarce in our kitchens right now, to put it mildly, the interior is not decorated. I for storing potatoes made a neat voluminous stool with padded seat, which can fit up to three buckets of root crops. Bench simple, and made it a common tool, which is in the building each owner. Materials is also one of those that always have on hand.
BENCH TAVERN
Inhabiting your country house — be it a small garden or a well-built cottage — many trucks bringing in the furniture that has served its purpose in a city apartment. And most of all from this whole situation turns out patchy, cumbersome and is inconsistent with the view of the place of rest. Meanwhile, it is very easy to furnish the interior of the country easy to produce and easy to use items that are able to make themselves, gradually complementing thus the original set, which in the end will be solved in the same style.
In domestic faucets-bathtub faucets have a swivel pipe (“goose”) as a used seal rubber ring. Over time, it is embedded abrasive particles contained in the polluted water, and at every turn the “goose” gradually grind off the walls of the grooves, weakened by the hood when expanding. As a result, the tube begins to “become loose” mounting of the mixer and the water leak. Further use of the tube breaks at the annular groove under the ring and requires replacement. But do not rush to throw it away. If you wish, you can extend its service life and even to improve the operational properties of tap mixer by changing the method of compaction and the water supply to the bathtub and sink. It is enough to perform a number of simple maintenance operations.
Bench drilling machines (such as NA-10, NA-12), as a rule, is at any station of young technicians in every school workshop. There are some in our school (I work as a teacher). And once a pupil of the 6th class when drilling holes in small parts dropped it in a vise. Began to turn them over to get the detail, didn’t hold, and the grip fell to the floor. Only by sheer luck that this incident was closed with a foot injury, although the consequences for the child could be much more serious. I think that such incidents are not uncommon: in school workshops and at the premises of technical circles often seen on the floor next to astelinastelin press dents from the clutches of the fallen.
It would seem that there is nothing easier, than to hammer in a nail. This can make any boy, not to mention women. Why is it even the men but this seemingly simple operation sometimes does not go smoothly: the nail is hammered badly and suddenly bent; or the hammer blow falls not on the nail head, and a finger!
V8-motor built in 1992 from scratch. All parts are constructed Soren Pedersen.
A huge number of companies today produce different types of refrigerators are sophisticated in designs and various additional functions. However, all this abundance is mainly for use in apartments and similar dwellings, where the daily need products are limited within certain limits.
THE MINELAYER MARTI. Scale model 1:200.
CRUISER ALGERIE. Scale model 1:200.
The furnace is designed for metals with suitable melting temperature in a volume of 10 cm3. It is an electrical transformer, the secondary winding ends of which are closed with a conductive vessel in which melting occurs. Oven can be used for artistic casting, in jewelry, for casting billets, alloys.