It happens that the house accumulates a large amount of glass bottles of colored glass, unusual and beautiful in form that it is a pity to throw away. Such containers can serve as prompts to publish in the journal “Earmaster” (Hungary), the main material for the “production”… the original glasses. As a tool used homemade box-cutter. To work you will also need epoxy glue, and in addition different grit abrasive paper.
When the faucet suddenly begins to run cloudy or rusty water, and a filter for cleaning the house is not then so off the cuff can be manufactured from readily available materials, probably available in every home medicine Cabinet.
In rural homesteads, and in ordinary suburban houses, which in mother Russia today Nemer-unread, without any stove — Russian, Dutch or a simple “stove” — is hardly a cost, even if “we have gas in the apartment”. Only still far not everywhere and not all have the “blue fuel”. But even if the gas is supplied, in the heat of summer to stand at the stove in the kitchen and prepare food — a handful. But have to do it, as you know, not once a day.
No, it will, of course, is not about the equipment of the dental office on a production site. However… picture this: a dentist, firmly gripping with two hands the body of the machine with the motor inside, trying to get to the tooth of the patient a thin boron fixed in the Chuck mounted directly on the motor shaft. Inconceivable, right! Everyone knows that the engine and boron spaced and connected to a long flexible shaft: hand of the doctor easy and comfortable to hold thin tip of the working head.
Whatever was planted in the garden — whether flowers, vegetables, shrubs or fruit trees — every plant requires regular, and often abundant and continuous irrigation.
When the son has grown up and it “passed” already five to ride on a sledge from a hill he lost all interest. He needed a new more dynamic entertainment. Remembering the scooters of your childhood, bent from metal rod or pipe and allowed to roll only on compacted snow or ice crust, I came up with their new, more modern and “all-terrain” option, so you can ride even on soft snow.
What would be a good tool or even the machine had craftsman in the house, just drill a hole or accurately process the workpiece by holding it with pliers, and even more in the hands of, quite frankly — impossible. Therefore, in the Arsenal of anyone, even a beginner DIY enthusiast, there is Vice. However, and this adaptation is not always thus, what is required, especially when high dimensional accuracy of the parts, strict parallel, or perpendicular to its surfaces, etc., etc.
Children’s railway — one of the most loved games boys. But if it has control elements, for example a traffic light with automatic switching of lights, the game becomes even more fun.
The simplest lamp of the decorative cap for automotive wheels. When you lose one of the decorative plastic cap from a car wheel, the remaining three, as a rule, it is necessary to replace as to buy the same to replace lost very problematic. Particularly annoying is throw away almost brand new, recently bought the caps.
To the two parts worked as a whole — they should be connected to. Where possible, use bonding, soldering or welding, but all these options are permanent fixtures. And here is the bolt to nut connection is universal: he is subject to any material, and if necessary disconnect them tight elements of the design — this fixture is easy to Unscrew. However, such a connection provides the necessary resistance only when the bonded parts are inactive; and in the event of impact, for example, vibration can fail because of such insidious phenomena as samothracian.
