Good recommendations

Motorists have appreciated a commercially available foot-pump to inflate tyres equipped with pressure gauge: it is easy to use and allows you to constantly monitor the pressure in the chamber. But the pump is the old type with the help of simple consoles can be equipped with a pressure gauge. This would require a metal Read more…

My way of fastening several sheets of paper, especially with a tight cover or tab, affordable, fast and reliable, so that will help out students or students who have to apply for different papers. Invested in in half, bend the “cover” of paper pages don’t have to glue or sew. It is sufficient to enclose Read more…

Convenient storage of small tools is not only about safety and effectiveness. I think that drills, taps, needles, and other small tool is best stored upright in a plate of thick rubber. Perforations drilled or punched with a sharpened pipe, and their diameters must be smaller than the diameters of the installed items by 30 Read more…

If the rune was not polishing — no problem! With the processing of small surfaces perfectly cope conventional tube driven in rotation by microdrill. To secure the tool cartridge in probnu 3/4 of its length you should install the screw and then cut off his head. Before polishing the tube should be rubbed with the Read more…

Chips, widely used in the electronics industry, are increasingly used in Amateur practice. However, when itike them in charge or replacement from the wizard, you need increased accuracy, and loyal companion of tweezers, it turns out it is not enough convenient: along case the ICJ did not seize, but backwards can damage the contacts. Here Read more…

A thin drawing pen tool is fragile, and inserted in a normal pen, easily spoiled by careless storage. Better to use it with the handle, and with a collet Chuck: and is held securely, and, turning, to store this safely.

how it works like this, and a good host you will not regret the five minutes to produce such a device. At the depot you can put any thick-walled bottle. You will also need the rubber tube and a metal or glass tube of length 10— 12 cm and an inner diameter of about 3 Read more…

Recently I had to solve an unexpected problem: how to hang “long” picture so that nothing showed outside, and fastening is reliable? Normal version with one nail did not fit hard to adjust the horizontal position of the frame; with two, it’s easier to do, but the desire for “stealth” suspension does not give jelaemoe Read more…

Usually to reinforce the cabinets on the stack, we Drill the horizontal holes, but if the plug is weak or loose fasteners, close to trouble: with the increase of the load the shelf can collapse. I drilled holes at an upward angle; in the furniture, and vertical panels, but down. It turns out a very Read more…