For school discos and Amateur recording magazine “Funkamateur” (GDR) offers a scheme of five “anal stereomixer (Fig. 1). It is designed to connect two stereophonically (X1, x2), two stereos, (XS, X4) and one microphone (X5) for a soloist or a master program.
Device, a scheme which offers the journal “Funk-shau” (Germany), is used to create different sound effects together with musical instruments. It is made in the form of a set-top box or a separate box to AMY. Is indicated in the diagram of transistors can be applied to domestic couples: KT315 KT361 or КТ3107/КТ3102 with any Read more…
It’s tempting to assemble a simple Telegraph device and to communicate using Morse code. Reliable two-way communication is needed in the conduct of military sports games and competitions, in a tourist campaign and in summer camp, it is interesting to set it up at home or at the cottage.
The electric signal amplitude decreases rapidly — within 2-4 s after pinch the strings, it accounts for only 20-30% of the maximum level. At the same time changing the tone color of the sound. This circumstance restricts the possibility of using the electric guitar as a solo instrument. That’s why natural “voice” strings replaced its electronic similarity with a constant volume level. For the first time such a device has used the group “the Beatles”. Now the same email attachment to AMY is known as disturber (deformer), or “FUZZ”.
There are various electronic devices to locate hidden wiring. However, at home the need for them arises relatively rarely, when, for example, produce the repair of the apartment or change the interior.
The electronic device described in mi readers, you can install on the toy, equipped with a separate drive for each caterpillar: tank, lunar Rover, Lunokhod. The model moves with headlights on in a darkened room, and set PA her the photodiodes capture the reflection of the headlights from obstacles. The appropriate commands to the drive engines on the basis of the received data takes the logical unit. Here’s how it works.
Small red-hot spiral, fed by electric current, in skilled hands becomes a kind of pencil, which is burned on the tree. This elektrovyzhigatel. For its production you will need a transformer, step-down the voltage to 220 V to 2-4, 1.5—2 m stranded wire (cord), electrical tape, nichrome wire Ø 0,5—0,8 mm with a length of 60-80 mm, wood 30 mm 0 blank or cut of the PCB [plywood] with a thickness of 7-9 mm, screws and M3 nuts, small screws, strips of brass of 1 mm thickness, twine. We offer our readers two versions of elektrovyzhigatel, and each is characterized by simplicity, reliability and safety in operation.
Just 30 minutes will it take to build a simple and reliable time switch that at a given point (in the range of 1-11 h) will switch on or off any home appliance power up to 0.5 kW. The device is made on the basis of a conventional mechanical clock, for example, “amber”, “Sevani”, “Ray”, in a plastic case of which a simple device consisting of two neon lamps T-0,3, a pair of resistors VS-0,25 or MLT-0,5, the micro-switch MP-1, socket for standard plug and fuse.
“Voiced” model tractor, car or locomotive immediately “alive”, if you supply electronic simulator sound. The scheme of the device, imitating the “voice” of the internal combustion engine, printed Yugoslav magazine “Radioamator”.
Equalizers are designed for frequency correction of the playback devices. The scheme of such a device published by the Romanian magazine “Technium”. We are talking about passive bandpass tone corrector, is connected between the two amplifier stages, compensating the loss of gain in the passive circuits. Variable resistors R7 and R5, respectively, lower and adjust the lowest frequency, R10 — medium and potentiometers R13 and R15 — highest and the highest frequency.