When Gennady Kulish arrived in Kirovohrad Institute of agricultural engineering, engineering, it, recent rocketmodeler, and in a head could not come that an important part of modern aviation and rocketry — radio location — will find application in agriculture. And that the range of agricultural machinery, he will experience no less exciting moments than with their launching of rockets.THE HARVESTER GOES ON THE COURSE
When Gennady Kulish arrived in Kirovohrad Institute of agricultural engineering, engineering, it, recent rocketmodeler, and in a head could not come that an important part of modern aviation and rocketry — radio location — will find application in agriculture. And that the range of agricultural machinery, he will experience no less exciting moments than with their launching of rockets.
AutoCAD – computer-aided design system that allows to perform technological documents. You can now engage in the design wherever there is an opportunity to use a computer.
In recent years, more and more supporters of progressive subsurface tillage. Individual gardeners produce it with a fork. One time there was a Ripper Berezutsky. In contrast, the proposed tool is more compact and lightweight, and make it will not be a problem for any grower.
Infringement of corners of forward wheels of cars leads to unpleasant consequences: increasing the load on the steering wheel, the difficult control of the car, there is an intensive unilateral wear of a protector of tires: when you increase the camber wears out faster outside, lower — inside. Therefore, as soon as the above symptoms, you should not shelving them to check and the corresponding adjustment of the camber angles.
RC model glider model aircraft built in the laboratory of Botkin’s House of pioneers and schoolboys champion of the Udmurt ASSR and the second winner of the all-Russian competitions of aeromodellers-school 1974 Igor Seninim.
Every radio Amateur knows how it is sometimes difficult to find in electronic equipment, faulty transistor, especially when there is no instrumentation. From the diagram it is necessary to use almost all transistors until you find the “culprit” of the failure. I tried to test the transistor directly into the circuit, not Vipava it.