Schematic model of the airframe and the aircraft, as you know, started flying much earlier than their full-size prototypes. Paving the real aircraft’s path in the sky, they are now helping novice modelers to do their first steps in small aircraft. It is a pity that “schematicity” of today do not differ from those that did even our grandparents: all of the same pine strips, aluminum wire, model aircraft rubber, a little tissue paper, yarn and glue. No new materials, no advanced design and engineering techniques. This publication is offered to novice modelers a simple universal model, which the manufacturer is not much more complicated schematic, but its aerodynamics and, consequently, the flight data is on a modern level.
Competitions of different rank showed that as prototypes for the manufacture of contour models are used only a dozen types of aircraft. And to participate our aeromodelling circle in the next competition, it was decided to make a model rare prototype. Our choice fell on PIPER CAB, one of the most successful light aircraft, produced in mass quantities since the pre-war (1935).
The subject of today’s article – geophysical rocket R-2A. In previous publications we described in detail the technology of making copies of R-1 and R-2. The same technology used to create the model of R-2A. Will not be superfluous once more to tell for those who have not read those numbers.
Model-a copy of the ballistic missile R-2
Simple, easily repaired, volatile, inexpensive… That’s only part of the requirements for training RC model aircraft. These requirements are fully satisfied “Trainer-RC” — RC plane engine with a working volume of 6.5 cm3 type of MDS or 0.S.MAX-40LA.
On a conventional two-wheeled Bicycle much gear not to take, even if it is equipped with a trunk. Meanwhile, the need from owners of these machines frequently. It is therefore advisable to make to the bike trailer.On the construction of such a two-wheeled trailer said Zbigniew Hyun-nel and Andrew Fedoruk in the Polish magazine “Mlody TECHNIK”, article from which prepared this publication.