Racing airboat engine “Raluka-7”. The journal “modelist-Konstruktor” has repeatedly told on the pages of the increasingly popular class of radio controlled racing boat with aerodiesel. Is there any need to remind them of the case differ from those created for similar models with the propeller, except that greater width, however, the design of the power unit with the propeller not in the example easier. So, for aerolister not required technologically sophisticated gear reducer, it does not need water-cooling system motor and transmission drive propeller. All this greatly facilitates the work over the model and, consequently, makes it available for production, even for novice athletes.
Read more
A. Lomakin from the city of Artem of Primorski territory considers that the design of his tractor pretty good, as is relatively simple due to selection (albeit random) units. The frame of the tractor is homemade, simple, rectangular. Welded from channel No. 14. Front — wheel cars. Rear axle Assembly from the forklift. The gear ratio of the main transmission (I = 17) and side (wheel) gear allowed to do without a dual.
The desire to build a model of a biplane under the existing engine MDS-6,5 KU initially led to the search for analogues. View magazines and catalogs helped to decide what I would like to see a future model. Original design prototype was a biplane DUO 40 of the company Graupner. The outline of this plane was simple and cute. Now it remained only to consider the design of the airplane.
Young inventors from the village of Enem, Krasnodar territory familiar to readers of our pages have already been published diagrams and descriptions of the designs, created with their hands. You guys have a slogan that they came up with this and follow it: “School piticescu — decent tools!” His words rural students confirm the business — not so long ago, they built a tractor, adapted to the conditions of the school sites. Its design tells the glee club Director VOIR N. M. OBREJA.
The idea is to make a mini-tractor ripe at once: an allotment I have a small, but because I was without equipment. In General, it was more a desire to test their capabilities. In the garage by that time had accumulated suitable assemblies and mechanisms. So, the wheels gave me friends (they have many years of lying idle) and the engine gave a friend, because I helped him to restore an old “Moskvich”.
In Moscow in the yard of the house № 11 on the 2nd Schukinskaya travel can often see the most incredible car designs, which are operated by boys and girls. And the amazing thing is that all this micro-technology they themselves have built. And the center of gravity of the infantile population of the yard — children’s technology club ZHKO research Institute of inorganic materials. Interesting about the machines that are created here, we are told in No. 9 for 1974 and No. 6 in 1975.
Oddly enough, recumbent… older bike. Its ancestor can be considered the original “self-moving carriage” proposed by the famous Russian inventor Kulibin in 1791. On her back, at the back, stood the servant, pressing down on the levers and spinning the two horizontal flywheel.
This universal machine with a capacity of 2.5 t built Ustinovich V. S. Stern Rostov region the engine of the machine from the tractor T-40: diesel, 4-cylinder, air-cooled output of 50 HP Frame from the mobile pumping stations, bridges and rear wheels from GAZ-51, the front wheels from mnogolemeshny plow, transmission from GAZ-53. Dump body and a manipulator with a lifting capacity of 1,5 t — homemade.
There is a perception that sailing is a lot of people with high incomes. Of course, in relation to racing dinghies and cruising yachts, this is largely true. However, from a small homemade ahtoska you can get no less pleasure than the solid cabin of a sailboat, the more it will cost you significantly less.
The hinged trailer was manufactured and installed on the tractor MTZ-5 (Fig. 1). Figure 2 shows a diagram of the tipper Assembly. Its main parts: a support frame body, weld metal landing frame and precast plank exterior.
