THE CORRUGATED BOARD MOTOR

CORRUGATED CARDBOARD WITH THE MOTORNot so long ago in the journal “modelist-Konstruktor” was about the simplest model of a glider made from a conventional packaging corrugated Board material although not aeromodelling, but it is durable, tough and light. By the way, a square meter of corrugated Board with a thickness of 3 mm has a weight of only 400 g, respectively, the density of this material is only 0.13 g/cm3! Experiments have shown that the durable and lightweight corrugated cardboard is well suited for creating flying models. Needed only in the cutting and processing of corrugated Board to consider some of its features and to use a knife-cutter, literally honed to razor sharpness, otherwise cut lines get ragged.

THE BIKE IN THE TRUNK

MOTORCYCLE IN THE TRUNKMOTORCYCLE IN THE TRUNKBefore you engage in the construction of microvesicle, I’ve been drawing various versions of its layout, trying on paper for all possible errors and miscalculations, which can only occur in the process. Looking ahead, it should be noted that designing on paper is one thing, fabrication is another. Many of the “roughness” out in the operation of the machine.

Read more

“FLYING WING” REZINOMOTORNAYA

MODEL No. 1. This design is a continuation of work on improving the model, which is described in “M-K” (No. 1, 1972). For better aerodynamics it is applied to a fuselage of circular cross-section. The keel has a swivel mechanism to provide a forced descent. The screw diameter is increased to 556 mm, which contributes to the duration of the flight motor and improves the dynamic characteristics of the start.

Read more

SIX INDEPENDENT AND DRIVE

SIX INDEPENDENT AND DRIVEThe Rover, shown in the photo, the original was made in a caterpillar form, and then converted into a four-wheel drive wheel, which for many years is in operation. Each of the six wheels, the front pair of which is driven, has an independent suspension. Wheels — tyres low-pressure chambers wheels tractor truck with a longitudinal brace and the transverse belts of the conveyor belt.

Read more

HOW TO EASE RIB

Modelers know how difficult it is to facilitate fine rib, without violating its strength. In the model airplane circled our House pioneers a way of cutting out successfully replaced the cutting. This causes the strength of the part and the work is done much faster. Hole punch tubes of different diameter, with the end sharpened Read more…

ON THE WAVES – “MOTH”

ON THE WAVES - Ultralight Dinghy international class “Moth” “the Moth” (Fig. 1, 2) simple in design, convenient in construction and possesses all the essential qualities of sports ships – fast, maneuverable and sensitive to control. All this allows to recommend it as the first sport of sailing to those who wants to achieve in sailing Olympic heights.

HARVESTER GARDENER

HARVESTER GARDENERHARVESTER GARDENERWhat is usually stored in the pantry a good host, enthusiastically engaged in cultivating and farming vegetable crops? As a rule, a large set of various tools, among which the most common shovel, hoe, rakes, hand cultivators, weed control, and other similar accessories simple assistants to facilitate the work and help to grow a good crop of vegetables and different varieties of greens. To deliver a similar Arsenal to the garden beds and planting is required to have truck.

Read more

MEET — CATOLET

MEET — CATOLETIn one of the first projects to be protected, incidentally, by the copyright certificate № 347232, has already been laid all the highlights of the design, which is meant today by the word “cacolet”. Here was envisaged and case-polymac, and is spaced from the center of mass of the motor, and pendulum the scheme of movement of the Cabinet. Reducible to the scheme-section (Fig. 1) clearly presented the main elements and components of this transport device.